This article introduces the paper [‘Development of creep-resistant magnesium casting alloys for high temperature automotive applications’] presented at the [‘WIT Transactions on The Built Environment, Vol 97, 2008 WIT Press’] 1. Overview: 2. Research Background: Background of the Research Topic: Magnesium alloys, owing to their low specific gravity, are highly desirable in automotive and aerospace
This article introduces the paper ‘A Review on Anodizing Process of Aluminum and Non-Aluminium Alloys’ published by ‘ResearchGate’. 1. Overview: 2. Abstracts or Introduction This paper provides a comprehensive review of the anodizing process applied to aluminum and non-aluminum alloys, a critical surface treatment for enhancing corrosion resistance in industrial applications. Anodizing, achieved by making
This article introduces the paper [‘Impact behaviour of A356 alloy for low-pressure die casting automotive wheels’] published by [‘Journal of Materials Processing Technology’]. 1. Overview: 2. Abstracts or Introduction Instrumented impact strength tests have been carried out on KV sub-size Charpy samples drawn from A356 aluminium alloy 17-in. wheels, produced by a low-pressure die casting.
This article introduces the paper [‘Applications of Magnesium and Its Alloys: A Review’] published by [‘Applied Sciences’]. 1. Overview: 2. Abstracts or Introduction Magnesium is highlighted as a promising material in this review, owing to its unique combination of mechanical and biomedical properties that render it suitable for a broad spectrum of applications. The abstract
This article introduces the paper ‘Current Trends in Metallic Materials for Body Panels and Structural Members Used in the Automotive Industry’ published by ‘MDPI’. 1. Overview: 2. Abstracts or Introduction Abstract: The development of lightweight and durable materials for car body panels and load-bearing elements in the automotive industry results from the constant desire to
This article introduces the paper “Analysis of Magnesium Addition, Hydrogen Porosity and T6 Heat Treatment Effects on Mechanical and Microstructural Properties of Pressure Die Cast 7075 Aluminum Alloy” presented at the THE GRADUATE SCHOOL OF NATURAL AND APPLIED SCIENCES OF MIDDLE EAST TECHNICAL UNIVERSITY 1. Overview: 2. Research Background: 3. Research Purpose and Research Questions:
This article introduces the paper [‘Solute micro-segregation profile and associated precipitation in cast Al-Mg-Si alloy’] presented at the [‘Philosophical Magazine’] 1. Overview: 2. Research Background: Background of the Research Topic: Solute segregation is an inherent phenomenon during the solidification process of aluminium alloys. This is primarily attributed to non-equilibrium conditions arising from rapid cooling rates,
This article introduces the paper [‘Fatigue behavior of A356-T6 aluminum cast alloys. Part I. Effect of casting defects’] presented at the [‘Journal of Light Metals’] 1. Overview: 2. Research Background: Background of the Research Topic: Cast aluminum alloys are increasingly utilized in the automotive sector owing to their superior castability, corrosion resistance, and notably their
This article introduces the paper “Effect of Artificial Aging Treatment on the Mechanical Properties and Regulation of Precipitated Phase Particles of High-Pressure Die-Cast Thin-Wall AlSi10MnMg Longitudinal Carrier” presented at Materials, MDPI 1. Overview: 2. Research Background: 3. Research Purpose and Research Questions: 4. Research Methodology 5. Main Research Results: 6. Conclusion and Discussion: 7. Future
This article introduces the paper “A super-ductile alloy for the die-casting of aluminium automotive body structural components”. 1. Overview 2. Research Background This research is based on the premise that weight reduction through the use of lightweight materials in the manufacturing of fuel-efficient transportation systems is an effective method for improving fuel economy and reducing
![Figure 2. Use of magnesium-based materials in the automotive industry. Reproduced with permission from Sankaranarayanan, S. and M. Gupta (2021). “Emergence of god’s favorite metallic element: Magnesium based materials for engineering and biomedical applications.”; published by Elsevier, 2021 [54].](https://castman.co.kr/wp-content/uploads/image-820-570x342.webp)
![Figure 9. Baseline part and demonstration part geometry (reproduced with permission from Reference [279]; copyright © 2024, The Minerals, Metals & Materials Society).](https://castman.co.kr/wp-content/uploads/image-803-570x342.webp)
![Figure 2. The Binary Phase Diagram of Al-Zn Alloy [1].](https://castman.co.kr/wp-content/uploads/image-426-527x342.webp)
