This article introduces the paper “Vacuum Rheocasting Heat Sinks with Significantly Improved Performance”. 1. Overview: 2. Research Background: The demand for heat sinks across various industries (e-mobility, telecommunications, electronics, etc.) is significantly increasing, along with stricter performance requirements. A primary requirement for heat sinks is high thermal conductivity. Pure aluminum exhibits excellent thermal conductivity (247
This article introduces the paper “Vehicle giga-casting Al alloys technologies, applications, and beyond”. Author links open overlay panelJian Yang abc, Bo Liu ac, Dongwei Shu b, Qin Yang d, Tiegang Hu dShow moreAdd to MendeleyShareCite https://doi.org/10.1016/j.jallcom.2025.178552Get rights and content Abstract The Giga-casting process, proposed by Tesla, has become a transformative technology with great potential for improving the lightweighting of super-sized complex thin-walled vehicle parts. Recently, the application of lightweight
This article introduces the paper “Recent developments in high-pressure die-cast magnesium alloys for automotive and future applications”. Gerry GangWangJ.P.WeilerMeridian Lightweight Technologies, Strathroy, Ontario N7G 4H6, Canada Abstract The use of magnesium alloy high pressure die cast (HPDC) components for structural applications, especially in the automotive and transportation industries, where weight reduction is of a great concern, is
This article introduces the paper “Influence of introducing Zr, Ti, Nb and Ce elements on externally solidified crystals and mechanical properties of high-pressure die-casting Al–Si alloy”. Keywords : aluminium alloy high Abstract High pressure die casting (HPDC) AlSi10MnMg alloy castings are widely used in the automobile industry. Mg can optimize the mechanical properties of castings
Here is a list of products that are effective when manufactured using Cu (Copper) High Pressure Die Casting (HPDC). The effectiveness in terms of cost and performance can vary depending on complex interactions of factors beyond the manufacturing method, including material properties, design, application requirements, and cost considerations. However, these are the types of components
Abstract This research presents the design and implementation process of a remote monitoring system for temperature and force-induced pressure measurements in the mold cavity of high-pressure die casting (HPDC). A K-type thermocouple sensor was chosen to gauge the aggressive environment inside the mold cavity. An ejector pin was adapted for the installation of this sensor,
by Dirk Lehmhus Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM, Wiener Straße 12, 28359 Bremen, GermanyMetals 2024, 14(3), 334; https://doi.org/10.3390/met14030334Submission received: 25 February 2024 / Accepted: 8 March 2024 / Published: 14 March 2024(This article belongs to the Special Issue Advances in Metal Casting Technology) 1. Introduction It is a platitude that science and technology do not necessarily evolve along straight paths.
Yu-Tong Yang, Zhong-Yuan Qiu, Zhen Zheng, Liang-Xi Pu, Ding-Ding Chen, Jiang Zheng, Rui-Jie Zhang, Bo Zhang & Shi-Yao Huang Abstract High-pressure die casting (HPDC) is one of the most popular mass production processes in the automotive industry owing to its capability for part consolidation. However, the nonuniform distribution of mechanical properties in large-sized HPDC products adds complexity to part property evaluation. Therefore, a methodology
Yiwu Xu ab1, Yuxin Zhang c1, Jinping Li d, Pan Wang e, Jianfeng Wang e, Houwen Chen c, Houqing Sun f, Hongyi Zhan e Abstract Chromium (Cr) is rarely added to Al–Si die cast alloys as it has a strong tendency to induce the formation of coarse-sized sludge particles. In the present study, high pressure die-cast samples made of Al-7wt.%Si–Cr–Mg alloys with varied Fe contents (0.11 wt%, 0.26 wt% and 0.32 wt%) were tensile tested under as-cast and T5 heat-treated conditions, in comparison
Yiwu Xu ab1, Yuxin Zhang c1, Jinping Li d, Pan Wang e, Jianfeng Wang e, Houwen Chen c, Houqing Sun f, Hongyi Zhan e Abstract Chromium (Cr) is rarely added to Al–Si die cast alloys as it has a strong tendency to induce the formation of coarse-sized sludge particles. In the present study, high pressure die-cast samples made of Al-7wt.%Si–Cr–Mg alloys with varied Fe contents (0.11 wt%, 0.26 wt% and 0.32 wt%) were tensile tested under as-cast and T5 heat-treated conditions, in comparison
![Figure 1. Fin designs on heat sinks: left with all parallel fins, right with angled fins increasing turbulence in the air (cooling medium) and increasing air exchange between the fins to maximize cooling [2].](https://castman.co.kr/wp-content/uploads/image-114-570x287.webp)
