This introduction paper is based on the paper “The Effect of Microstructural Features, Defects and Surface Quality on the Fatigue Performance in Al-Si-Mg Cast Alloys” published by “Jönköping University, School of Engineering, Dissertation Series No. 084”. 1. Overview: 2. Abstract: Global warming is driving industry to manufacture lighter components to reduce carbon dioxide (CO2) emissions.
This introduction paper is based on the paper “New Trends in Aluminum Die Casting Alloys for Automotive Applications” published by “The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM)”. 1. Overview: 2. Abstract: In order to provide ecological balance, new technologies are being developed to reduce fuel consumption. Within these new technologies, usage of
This introduction paper is based on the paper “Double-Sided Surface Structures with Undercuts on Cold-Rolled Steel Sheets for Interlocking in Hybrid Components” published by “MDPI”. 1. Overview: 2. Abstract: Weight reduction strategies are essential for the transportation sector to reduce greenhouse gas emissions or extend the range of electric vehicles. In the field of lightweight
This paper introduction was written based on the “Market Overview Giga Casting and Giga Presses in the Automotive Industry” published by anp management consulting GmbH, Essen, Germany. Last update: Essen, 8th of January 2024. Introduction This document provides a market overview of giga casting and giga presses within the automotive industry. It highlights market trends,
This article introduces the paper [‘Effects of microstructure and casting defects on the fatigue behavior of the high-pressure die-cast AlSi9Cu3(Fe) alloy’] presented at the [‘Procedia Structural Integrity’] 1. Overview: 2. Research Background: Background of the Research Topic: High-pressure die-cast (HPDC) components are increasingly utilized due to their “good flexibility and high productivity”, making them suitable
This introductory paper is the research content of the paper [“Manufacturing of Aluminum Alloy Parts from Recycled Feedstock by PIG Die-Casting and Hot Stamping”] published by [MDPI]. 1. Overview: 2. Abstract PIG (Pin-Injection-Gate) die-casting and hot stamping was developed for fabrication of small-sized and thin-walled aluminum alloy parts from the recycled feedstock. The pure aluminum
This paper introduction was written based on the “THE Aluminium Automotive MANUAL Manufacturing – Casting methods” published by the European Aluminium Association. Introduction This document provides an overview of various casting methods, with a focus on their applications in the automotive industry. It covers a range of techniques from traditional sand casting to more advanced
This article introduces the paper “Evaluation of the Microstructure and Properties of As-Cast Magnesium Alloys with 9% Al and 9% Zn Additions” presented in Materials, MDPI. 1. Overview: Title: Evaluation of the Microstructure and Properties of As-Cast Magnesium Alloys with 9% Al and 9% Zn AdditionsAuthors: Lechosław Tuz, Vít Novák, and František TatíčekPublication Year: 2025Publishing
This introductory paper is the research content of the paper “IMPROVING QUALITY AND EFFICIENCY IN DIE CASTING OF COMPLEX HOUSINGS” published by Anveshana’s International Journal of Research in Engineering and Applied Sciences. 1. Overview: 2. Abstract In order to provide ecological balance, new technologies are being developed to reduce fuel consumption. Within these new technologies,
This introductory paper is the research content of the paper [“Improving Die Casting Melt Quality and Casting Results with Melt Quality Analysis and Filtration”] published by [Metaullics Systems Co. L.P.]. 1. Overview: 2. Abstract The use of aluminum castings in automotive applications continues to expand at a significant pace. High volume requirements are served by
