구리 다이캐스팅으로 IE4 효율 수준을 달성하기 위한 15kW, 2극 유도 전동기의 설계 최적화 Abstract This paper describes the design and simulation of 15 kW, 2 pole, 50 Hz, three phase induction motor to achieve IE4 efficiency level as defined by the International Electrotechnical Commission (IEC). For achieving higher efficiency, the motor is designed, optimized and
압력 다이 캐스팅에서 구리 합금 다이의 열 거동에 대한 실험적 조사 L. D. Clark, M. T. Alonso Rasgado, K. Davey, S. Hinduja Author and Article InformationJ. Manuf. Sci. Eng. Nov 2006, 128(4): 844-859 (16 pages)https://doi.org/10.1115/1.2280586Published Online: February 3, 2006 Abstract The rate of heat extraction during the pressure die casting process is central to both the quality and the
This paper summary is based on the article [CORE VIABILITY SIMULATION FOR SALT CORE TECHNOLOGY IN HIGH-PRESSURE DIE CASTING] presented at the [International Journal of Metalcasting/Summer 2013] Abstract In high-pressure die casting (HPDC) undercuts can only be fabricated by using complex high-maintenance sliders. Until now, this technology has not been used for large-scale and cost-sensitive
D. T. PetersCopper Development Association Inc. Hilton Head Island, SCJ. G. CowieCopper Development Association Inc. New York, NY E. F. Brush, Jr.Copper Development Association Inc. Weston, MA S. P. MidsonCopper Development Association Inc. Denver, CO Presented by: North American Die Casitng Association Abstract Little use has been made of pressure die casting for the manufacture
Daniel Liang, Xu Yang, Jiabin Yu, Victor Zhou Abstract This paper introduces the recent technological progress in China on the manufacture of die cast Copper Motor Rotors (CMR) for induction motors. This manufacturing process provides a simple and practical means for large-scale economical production of high-efficiency induction motors. Rotor die casting obstacles/solutions are presented along
Do-Kwan Hong, Jae-Hak Choi, Pil-Wan Han, Yon-Do Chun, Byung-Chul Woo & Dae-Hyun Koo International Journal of Precision Engineering and Manufacturing volume 13, pages2251–2257 (2012)Cite this article Abstract This paper deals with the analysis techniques of a high speed and high efficiency 10 kW, 30,000 rpm rated induction motor. The induction motor has been analyzed by time-varying magnetic finite element
동 다이캐스팅 고속 유도전동기의 불평형 응답 해석 Abstract This paper deals with a copper die casting induction motor which has several advantages of motor performance. The developed motor is used as spindle motor in machining center. The dynamic characteristic analysis of rotor is dealt with for precision machining. The critical speed of rotor considering rotation
D. T. PetersCopper Development Association Inc.Hilton Head Island, SCJ. G. CowieCopper Development Association Inc.New York, NYE. F. Brush, Jr.Copper Development Association Inc.Weston, MAS. P. MidsonCopper Development Association Inc.Denver, CO Presented by: North American Die Casitng Association Abstract Little use has been made of pressure die casting for the manufacture of copper or copper alloy parts
IyasKhaderab AlexanderRenzb AndreasKailerb DanielHaascaDepartment of Industrial Engineering, German Jordanian University, P.O. Box 35247, 11180 Amman, JordanbFraunhofer Institute for Mechanics of Materials IWM, Woehlerstr. 11, 79108 Freiburg, GermanycFCT Ingenieurkeramik GmbH, Gewerbepark 11, 96528 Frankenblick, Germany Abstract Due to the high melting temperature of copper and copper alloys, conventional die-steel components used in pressure die casting these
. Jelínek, E. Adámková*Department of Metallurgy and Foundry Engineering, VŠB-Technical University of Ostrava, listopadu 2172/15, 708 33 Ostrava – Poruba, Czech Republic*Corresponding author. E-mail address: eliska.adamkova@vsb.czReceived 04.03.2014; accepted in revised form 30.03.2014 Abstract Development of salt cores prepared by high-pressure squeezing and shooting with inorganic binders has shown a high potential of the given technology
