Tag Archives: Applications

Fig. 10. (Color online) DXCT of ADC12 sample 1: (a) total-energy 2D CT image, (b) low-energy 2D CT image, and (c) high-energy 2D CT image.

Micro X-ray Computed Tomography and Machine Learning Assessment of Impregnation Efficacy of Die-Casting Defects in Metal Alloys

Beyond Visual Inspection: Using Micro-XCT and AI for Flawless Impregnation Efficacy Assessment This technical summary is based on the academic paper “Micro X-ray Computed Tomography and Machine Learning Assessment of Impregnation Efficacy of Die-Casting Defects in Metal Alloys” by Ajith Bandara, Koichi Kan, Katanaga Yusuke, Natsuto Soga, Takagi Katsuyuki, Akifumi Koike, and Toru Aoki, published

Read More

Fig. 1. Stages of the Metal Extrusion Additive Manufacturing technique combined with solar sintering.

Harnessing the Sun: A Breakthrough in Sustainable, High-Performance Copper Component Manufacturing

This technical summary is based on the academic paper “Sustainable production of copper components using concentrated solar energy in material extrusion additive manufacturing (MEX-CSE)” published by Antonio Cañadilla Sánchez, Gloria Rodríguez, Ana Romero, Miguel A. Caminero, and Oscar J. Dura in Sustainable Materials and Technologies (2023). It was analyzed and summarized for manufacturing experts by

Read More

Fig. 3 Geometry of the component for validation and schematic representation of forces and boundary conditions of the test rig

Fatigue assessment of hot-chamber zinc die-casting components in relation to the casting process and casting process simulation

This introduction paper is based on the paper “Fatigue assessment of hot-chamber zinc die-casting components in relation to the casting process and casting process simulation” published by “Fraunhofer Verlag”. 1. Overview: 2. Abstract: Zinc die-casting alloys are used in many industries for static or low-cycle applications due to their high strength and surface quality. The

Read More

Research on Aluminum Alloy Materials and Application Technology for Automotive Lightweighting

Research on Aluminum Alloy Materials and Application Technology for Automotive Lightweighting

Unlocking Automotive Lightweighting: A Deep Dive into Aluminum Alloy Applications and Technology This technical summary is based on the academic paper “Research on Aluminum Alloy Materials and Application Technology for Automotive Lightweighting” by Jianru Chen, published in Academic Journal of Materials & Chemistry (2023). Keywords Executive Summary The Challenge: Why This Research Matters for HPDC

Read More

Fig. 1. Total casting surface, mag. 3x

Influence of Al5FeSi Phases on the Cracking of Castings at Al-Si Alloys

Cracking the Code: How Iron Contamination Creates Catastrophic Failure in Al-Si Alloy Castings This technical summary is based on the academic paper “Influence of Al5FeSi Phases on the Cracking of Castings at Al-Si Alloys” by I. Hren, J. Svobodova, and Š. Michna, published in ARCHIVES of FOUNDRY ENGINEERING (2018). It has been analyzed and summarized

Read More

Figure 1: Evolution of material damage by different stress states (Engelen, 2005).

A Stochastic Approach for Damage Modelling of Cast Alloys

Beyond Averages: The Future of Predictive Simulation for Cast Aluminum Alloys This technical summary is based on the academic paper “A Stochastic Approach for Damage Modelling of Cast Alloys” by Christian Mühlstätter, published in Proceedings of 8th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2018) (2018). Keywords Executive Summary The Challenge:

Read More

Fig. 1 Summary of elongation-tension variation of the copper based material a) for forged and laminated states, b) laminated and c) forged with different heat treatments applied like recovered or wat

Unlocking Superior Vibration Damping: How Stress Enhances the Performance of CuZnAl Shape Memory Alloys

This technical summary is based on the academic paper “Effect of stress on damping capacity of a shape memory alloy CuZnAl” published by N. CIMPOEȘU, S. STANCIU, M. MAYER, I. IONIȚĂ, R. HANU CIMPOEȘU in the Journal of Optoelectronics and Advanced Materials (2010). It was analyzed and summarized for HPDC experts by CASTMAN experts with

Read More

Fig. 1. Comparison of copper weld seam surfaces for same energy per unit length with (a) typical failures during static beam guidance; (b) unsuitable oscillation parameters; (c) adapted oscillation parameters

Enhanced process understanding for laser welding of copper and aluminum alloys with dynamic beam oscillation

Unlocking Flawless Welds: How Dynamic Beam Oscillation Transforms Laser Welding for Die Casting This technical summary is based on the academic paper “Enhanced process understanding for laser welding of copper and aluminum alloys with dynamic beam oscillation” by Stephan Börner et al., published in Lasers in Manufacturing Conference 2023. It has been analyzed and summarized

Read More

Fig. 1 Graphic representation of the CTE

Hybrid forecasting modelling of cost and time entities for planning and optimizing projects in the die-cast aluminium industry

Unlock 85%+ Accuracy in Die Casting Project Forecasting: A New Hybrid Model This technical summary is based on the academic paper “Hybrid forecasting modelling of cost and time entities for planning and optimizing projects in the die-cast aluminium industry” by Muñoz-Ibañez, C., Chairez, I., Jimenez-Martinez, M., Molina, A., and Alfaro-Ponce, M., published in Advances in

Read More

Figure 15. CK1 engine – external views.

Beyond Poppet Valves: How Rotary Valve Engines Deliver Unmatched Power and Multi-Fuel Capability

This technical summary is based on the academic paper “Rotary Valve 4-Stroke Engines for General Purpose Power Equipment and Unmanned Systems” published by Brian Mason, Keith Lawes (RCV Engines Limited), and Koichi Hirakawa (KAAZ Corporation) in SETC2022 New Product Technology Session (2022). It was analyzed and summarized for HPDC experts by CASTMAN experts with the

Read More