Summary of “Automobile Parts Casting-Methods and Materials Used: A Review” This material is based on the paper “Automobile Parts Casting-Methods and Materials Used: A Review” by Madhav Goenka, Chico Nihal, Rahul Ramanathan, Pratyaksh Gupta, Aman Parashar, and Joel Jb.Paper Source: https://doi.org/10.1016/j.matpr.2020.03.518 1. Overview: 2. Research Background: 3. Research Objectives and Research Questions: 4. Research Methodology
Mingfan Qi a,∗, Yonglin Kanga, Bing Zhoua, Wanneng Liaoa, Guoming Zhua, Yangde Li b,Weirong Li ba School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China b Dongguan EONTEC Corporation, Ltd., Dongguan 523662, China Abstract A simplified process, namely forced convection stirring (FCS), was proposed to prepare four differentsemisolid slurries
EwanLordanaYijieZhangaKunDouabAlainJacotacChrysoulaTzileroglouaPaulBlakedZhongyunFanaaBrunel Centre for Advanced Solidification Technology, Brunel University London, Uxbridge, Middlesex, UB83PH, UKbSchool of Metallurgy and Environment, Central South University, Changsha, 410083, Hunan, ChinacCalcom ESI SA, SwitzerlanddJaguar Land Rover Ltd, Coventry, CV3 4LF, UK Abstract This article unmasks the probabilistic nature of high-pressure die casting; specifically, the cause of scatter in the tensile ductility of
P. Jelínek, E. Adámková*Department of Metallurgy and Foundry Engineering, VŠB-Technical University of Ostrava, listopadu 2172/15, 708 33 Ostrava – Poruba, Czech Republic*Corresponding author. E-mail address: eliska.adamkova@vsb.czReceived 04.03.2014; accepted in revised form 30.03.2014 Abstract Development of salt cores prepared by high-pressure squeezing and shooting with inorganic binders has shown a high potential of the given technology
