Yiwu Xu ab1, Yuxin Zhang c1, Jinping Li d, Pan Wang e, Jianfeng Wang e, Houwen Chen c, Houqing Sun f, Hongyi Zhan e Abstract Chromium (Cr) is rarely added to Al–Si die cast alloys as it has a strong tendency to induce the formation of coarse-sized sludge particles. In the present study, high pressure die-cast samples made of Al-7wt.%Si–Cr–Mg alloys with varied Fe contents (0.11 wt%, 0.26 wt% and 0.32 wt%) were tensile tested under as-cast and T5 heat-treated conditions, in comparison
Read More
Yiwu Xu ab1, Yuxin Zhang c1, Jinping Li d, Pan Wang e, Jianfeng Wang e, Houwen Chen c, Houqing Sun f, Hongyi Zhan e Abstract Chromium (Cr) is rarely added to Al–Si die cast alloys as it has a strong tendency to induce the formation of coarse-sized sludge particles. In the present study, high pressure die-cast samples made of Al-7wt.%Si–Cr–Mg alloys with varied Fe contents (0.11 wt%, 0.26 wt% and 0.32 wt%) were tensile tested under as-cast and T5 heat-treated conditions, in comparison
Read More
Xin Yu a, Yafeng Li b, Yang Bai a, Wei Huang c, Bing Ye a, Xiangyang Kong d Abstract The temperature dependence of mechanical strength including yield strength (YS) and ultimate tensile strength (UTS) in HPDC WZA631 alloy is investigated in a wide temperature range from room temperature (RT) to 350 °C. It is found that at 25–300 °C, YS and UTS do not drop markedly, from 173 MPa and 274 MPa at RT to 113 MPa and 170 MPa at 300 °C, respectively. While
Read More
Part of the The Minerals, Metals & Materials Series book series (MMMS) Abstract In this work, a modified Al–Si–Mg (A356) alloy was prepared by vacuum-assisted high pressure die casting processes (V-HPDC). To release residual stresses, various thermal treatment schemes over a wide range of temperatures between 120 and 350 °C were experimented to the as-cast V-HPDC alloy, in
Read More
Part of the The Minerals, Metals & Materials Series book series (MMMS) Abstract In this work, a modified Al–Si–Mg (A356) alloy was prepared by vacuum-assisted high pressure die casting processes (V-HPDC). To release residual stresses, various thermal treatment schemes over a wide range of temperatures between 120 and 350 °C were experimented to the as-cast V-HPDC alloy, in
Read More
OksanaOzhoga-MaslovskajaElisabettaGariboldiJannis NicolasLemkeShow moreAdd to MendeleyShareCite https://doi.org/10.1016/j.matdes.2015.12.003Get rights and content Highlights • Critical conditions for blister formation of Al–9Si–3Cu–Fe alloy are identified via a FE model.• Blister formation is modeled for wide range of temperatures, pore pressure, shape, location, and size.• Strain field shows blister formation related to strain localization, depending of pore geometry.• Lamina-shaped discontinuities
Read More
