Salt Core-E | CASTMAN

Large grain-size-dependent rheology contrasts of halite at low differential stress: evidence from microstructural study of naturally deformed gneissic Zechstein 2 rock salt (Kristallbrockensalz) from the northern Netherlands

By user05/29/2023Salt Core-E, Technical Data-EApplications, CAD, IGS, Microstructure, Review, Salt Core, STEP, Stress–strain

Jessica Barabasch,Joyce Schmatz,Jop Klaver,Alexander Schwedt,and Janos L. Urai Abstract Constitutive laws to predict long-term deformation of solution-mined caverns and radioactive-waste repositories in rock salt play an important role in the energy transition. Much of this deformation is at differential stresses of a few megapascals, while the vast majority of laboratory measurements are at much higher differential

High-Temperature Mechanical Properties of NaCl–Na₂CO₃ Salt-Mixture Removable Cores for Aluminum Die-Casting

By user03/20/2023Salt Core-E, Technical Data-EDie casting, Microstructure, 알루미늄 다이캐스팅

Katsunari Oikawa, Kazuhiro Sakakibara, Youji Yamada, Koichi Anzai Abstract The NaCl–Na2CO3 salt mixture is proposed as a water-soluble core material for aluminum die-casting processes. The mechanical properties and microstructures of NaCl–Na2CO3 samples prepared by gravity casting were investigated. The salt mixtures had superior properties compared to those of the pure salts. Plastic deformation occurred during compression tests at high temperatures

Fabrication and Characterization of High-strength Water-soluble Composite Salt Cores via Layered Extrusion Forming

By user11/16/2022Salt Core-E, Technical Data-Ealuminum alloy, Die casting, High pressure die casting, Microstructure, Review, Salt Core

Zheng Chen, Suo Fan, Lei Peng, Yincheng Wang, Xiaolong Gong, Xinwang Liu & Zitian Fan International Journal of Metalcasting (2022)Cite this article 67 Accesses Metricsdetails Abstract This paper presents a novel process for preparing high-strength water-soluble salt cores with complex structure via layered extrusion forming using K2SO4 and KCl as the base salt materials, which is suitable for manufacturing

Fabrication of high-strength salt cores for manufacturing hollow aluminum alloy die castings

By user11/02/2022Salt Core-E, Technical Data-Ealuminum alloy, Die casting, Microstructure, Salt Core

Xiaolong Gong, Xiongjie Xiao, Xinwang Liu & Zitian Fan Received 03 Apr 2022, Accepted 21 Apr 2022, Published online: 13 May 2022 Download citation https://doi.org/10.1080/10426914.2022.2072887 CrossMark ABSTRACT In this work, the high-strength composite salt cores reinforced by corundum powder were successfully prepared using 30 mol% Na2SO4 +70 mol% NaCl as the matrix materials, which can be used to fabricate

About the impact on gravity cast salt cores in high pressure die casting and rheocasting

By user10/26/2022Salt Core-E, Technical Data-ECasting Technique, CFD, Die casting, FLOW-3D, High pressure die casting, Microstructure, Salt Core

Author links open overlay panelAndreasSchillingDanielSchmidtJakobGlückNiklasSchwenkeHusamSharabiMartinFehlbierShow moreAdd to MendeleyShareCite https://doi.org/10.1016/j.simpat.2022.102585Get rights and content Under a Creative Commons license Open access Abstract In this work, a simulations study on the impact on gravity cast salt cores was carried out for the different casting parameters in high pressure die casting as well as in rheocasting. To compare the simulation results, salt cores were

First-Principles Calculation and Mechanical Properties of NaCl–Na2SO4 Composite Water-Soluble Salt Core

By user10/20/2022Salt Core-E, Technical Data-Ealuminum alloy, CFD, Die casting, High pressure die casting, Microstructure, Review, Salt Core

Xue-ting Wang, Wei-hua Liu, Xuan-yu Liu & Lai Song International Journal of Metalcasting (2022)Cite this article 84 Accesses 1 Citations Metricsdetails Abstract In this paper, the interfacial energy of various inorganic salts was calculated using the first principle. Finally, NaCl and Na2SO4 were determined as the core materials. A high-strength composite salt core was prepared by optimizing the distribution ratio

Development of Salt Core Use as an Alternative in Aluminum Alloy Castings.

By user10/12/2022Aluminium-E, Copper-E, Salt Core-E, Technical Data-EAl-Si alloy, aluminum alloy, Die casting, Efficiency, Salt Core

Tülay Hançerlioğlu 1*1 R&D Department Nemak İzmir Döküm San.A.Ş. tulay.hancerlioglu@nemak.com Orcid: 0000-0003-2373-4405Received: 6 December 2021Accepted: 1 June 2022DOI: 10.18466/cbayarfbe.1033177 Abstract For creating complex geometric shapes in the cast part, salt was used to produce core instead of sandwhich is thermo-chemical or chemical process using resin as a binder. In salt core casting, the efficiencywill be

Effects of glass fiber size and content on microstructures and properties of KNO3-based water-soluble salt core for high pressure die casting

By user10/06/2022Aluminium-E, Salt Core-E, Technical Data-Ealuminum alloy, Casting Technique, Die casting, High pressure casting, High pressure die casting, High pressure die casting (HPDC), Microstructure, Salt Core

Xiaolong Gong, Wenming Jiang , Fuchu Liu, Zhiyuan Yang, Feng Guan, and Zitian FanState Key Laboratory of Materials Processing and Die and Mould Technology, Huazhong University of Science andTechnology, Wuhan 430074, China Copyright 2020 American Foundry Societyhttps://doi.org/10.1007/s40962-020-00480-9 Abstract The water-soluble salt core with higher bending strength and toughness is necessary to withstand the high pressure

In-Mold Coating in Pressing of Natural-Fiber-Reinforced Salt Cores for High-Pressure Die-Casting Applications

By user09/14/2022Aluminium-E, Salt Core-E, Technical Data-EDie casting, Salt Core

Patricia Erhard, Dominik Boos & Daniel Günther Proceedings of the Munich Symposium on Lightweight Design 2021 pp 35–43Cite as In-Mold Coating in Pressing of Natural-Fiber-Reinforced Salt Cores for High-Pressure Die-Casting Applications Patricia Erhard, Dominik Boos & Daniel Günther Conference paper First Online: 06 August 2022 14 Accesses Abstract High-pressure die-casting (HPDC) is known as a highly productive manufacturing process for light metals.

$FIGURE 3 Soot deposition on throttle valve (Configuration-1), left: CFD results showing cycle averaged EGR fraction contours on throttle valve, right: sample of throttle valve in test$

Hot Spot on Plastic Duct & Soot Deposition on Throttle Valve Using CFD Simulation

By user06/14/2022Aluminium-E, Salt Core-E, Technical Data-ECFD, EGR MIXER

CFD 시뮬레이션을 사용하여 플라스틱 덕트의 열 핫스팟 및 스로틀 밸브의 그을음 침착을 최소화하기 위한 EGR 믹서 최적화 In recent time, with inception of BS VI emission regulation with more focus on fuel economy and emission, many engine parts which were conventionally made from metal are getting replaced with plastic components for reducing weight to attain

Category Archives: Salt Core-E