Tag Archives: Draft

Figure 6. The pressure field at the times of impact and immediately afterwards

On the CFD Modelling of Slamming of the Metal Melt in High-Pressure Die Casting Involving Lost Cores

by Sebastian Kohlstädt 1,2,Michael Vynnycky 1,3,* andStephan Goeke 41Division of Processes, Department of Materials Science and Engineering, KTH Royal Institute of Technology, Brinellvägen 23, 100 44 Stockholm, Sweden2Volkswagen AG—Division of Components Manufacturing, Dr. Rudolf-Leiding-Platz 1, 34225 Baunatal, Germany3Department of Mathematics and Statistics, University of Limerick, Limerick V94 T9PX, Ireland4Institute of Mechanics, Kassel University, Mönchebergstr. 7, 34125 Kassel, Germany*Author to whom

Read More

Fig. 1. (a) Die-casting mold cooling channel with cooler; (b) Schematic illustration of explosive bonding (expansion) and Cu inserted die-casting cooling channels via explosive working.

Enhanced cooling channel efficiency of high-pressure die-casting molds with pure copper linings in cooling channels via explosive bonding

Sang-SooShina, Sang-KeeLeeb, Dae-KyeomKimc, BinLeecaR&D Center, Oh-Sung Tech Co. Ltd., Siheung, 15112, Republic of KoreabDepartment of Advanced Material Application, Daegu Campus of Korea Polytecnic, Daegu, 41765, Republic of KoreacKorea Institute for Rare Metals, Korea Institute of Industrial Technology, Incheon, 21999, Republic of Korea Abstract The cooling efficiency of aluminum die-casting molds is critical to prevent soldering,

Read More

Fig. 1. XRD profile of the ADC12 alloy sample produced by the diecasting process. Bragg diffractions of Al and Si polycrystals are observed. Note that the Bragg diffractions of Au2Si and AuCu3 alloys are detected. The XRD profile of the ADC12 ingot sample was also displayed for comparison.

Effect of vacuum annealing and characterization of diecast ADC12 aluminum alloys

Effect of vacuum annealing and characterization of diecast ADC12 aluminum alloys Jo, Jihoon (Department of Materials Science and Engineering, Chosun University) ; Ham, Daseul (Department of Materials Science and Engineering, Chosun University) ; Oh, Seongchan (Department of Materials Science and Engineering, Chosun University) ; Cha, Su Yeon (Department of Materials Science and Engineering, Chosun University) ; Kang, Hyon Chol (Department

Read More

Sources of Porosity in Die Casting

How to Control Porosity With Processing Parameters

The porosity of die cast parts is one of the primary concerns of buyers and designers. In die casting, porosity refers to the air pockets, small voids, or pores found within a metal part. Too much porosity in a part can be dangerous as it can compromise the structural integrity of the component. Porosity can

Read More

Schematic of a hot-chamber machine

Hot Chamber Die Casting Method vs Cold Chamber Die Casting Method

Depending on the project, aluminium casting is carried out through a “hot” or “low” process. Diecasting is one of the most economical and fast molding processes. The advantage of this production process is that hundreds of thousands of castings can be produced relatively quickly using a single mold. All parts produced are of uniform quality

Read More

measuring can be done three ways

How to Avoid Die Casting Defects

Reference : https://diecasting.com/blog/how-to-avoid-die-casting-defects/ The production of die-castings includes a number of steps, any of which can result in a defective casting if not properly executed. Since repairing bad castings can be expensive, it’s important to avoid defect occurrences if possible. We’ll look at some common to areas of  die casting defects — including wall thickness

Read More

2020-2025 High Pressure Die Casting Market Snapshot

HIGH PRESSURE DIE CASTING MARKET – GROWTH, TRENDS, COVID-19 IMPACT, AND FORECASTS (2021 – 2026)

The High Pressure Die Casting Market is segmented by Raw Material (Aluminum, Zinc, and Magnesium), Application (Automotive, Electrical and Electronics, Industrial Applications, and Other Applications), and Geography. Reference Source : https://www.mordorintelligence.com/industry-reports/high-pressure-die-casting-market Market Snapshot Market Overview The high pressure die casting market is estimated to register a CAGR of 6.36% during the forecast period, 2020-2025. The

Read More

다이 캐스팅의 대부분을 차지하는 주요 합금

HPDC in the Automotive Industry

Origin Article : https://www.diecastingdesign.org/blog/advancements-in-die-casting/ HPDC in the Automotive Industry There are several reasons HPDC is a popular method within the automotive industry. For starters, automotive designers quickly realized the potential in HPDC based on its ability to successfully achieve crash and safety-critical application requirements. HPDC also helps the growing interest in overall improved consumption by

Read More

Yamaha Motor accepting orders for prototype 350kW-class hyper-EV electric motor

2021. 4. 12 We are accepting orders for developing prototype electric motors featuring industry-leading output density for use in automobiles and other vehicles. Yamaha Motor is working to create electric motors that are compact, high-output and stir the senses by leveraging our technology and expertise in casting, machining, the use of high-efficiency segment conductors and

Read More

Aluminum applications are classified into 2 categories (platform and component) and 13 groups

Automotive applications for aluminum

New DuckerFrontier survey finds aluminum remains fastest growing automotive material, emerging as a preferred metal for EVs orgin article: New DuckerFrontier survey finds aluminum remains fastest growing automotive material, emerging as a preferred metal for EVs – Green Car Congress 13 August 2020 A new survey conducted by DuckerFrontier finds that aluminum, already the fastest growing automotive material, is

Read More