This introduction paper is based on the paper “Application of wear-resistant PACVD coatings in aluminium diecasting: economical and ecological aspects” published by “Surface and Coatings Technology”. 1. Overview: 2. Abstract: One of the major manufacturing techniques for aluminium precision parts is the pressure diecasting process. However, nowadays the state of the art involves the application
This article introduces the paper [‘Increasing the lifespan of high-pressure die cast molds subjected to severe wear’] published by [‘Surface & Coatings Technology’]. 1. Overview: 2. Abstracts or Introduction Regardless of the increasing incorporation of composite materials on vehicle components, high pressure die casting still remains one of the most useful manufacturing techniques to obtain
by Andrea Sütőová 1,*, Róbert Kočiško 1,*, Patrik Petroušek 1, Martin Kotus 2, Ivan Petryshynets 3 and Andrii Pylypenko 4 Abstract The wear and degradation of tools applied in the high-pressure die casting of Al alloys induce significant financial losses. The formation of failures on the surface of mold parts caused by erosion, thermal fatigue, corrosion, and soldering negatively affects the surface quality
진공도가 알루미늄 다이캐스팅의 다공성과 기계적 성질에 미치는 영향 Author links open overlay panelHanxueCaoabMengyaoHaoaChaoShenaPengLiangaShow moreAdd to MendeleyShareCite https://doi.org/10.1016/j.vacuum.2017.09.048Get rights and content Abstract AlSi9Cu3 alloy castings were produced by the vacuum-assisted high pressure die casting (HPDC) process under three different absolute pressures: 500 mbar, 200 mbar and 100 mbar. The influence of absolute pressure in the die cavity on the porosity, microstructure
