by Dirk Lehmhus Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM, Wiener Straße 12, 28359 Bremen, GermanyMetals 2024, 14(3), 334; https://doi.org/10.3390/met14030334Submission received: 25 February 2024 / Accepted: 8 March 2024 / Published: 14 March 2024(This article belongs to the Special Issue Advances in Metal Casting Technology) 원본 PDF 보기 1. 소개 본 텍스트는 금속 주조 기술의 발전 이라는 제목의 특별호에 대해 작성된 사설의 두 번째
이 소개 자료는 “[March 2021 Journal of Mechanical Engineering Research and Developments ]”에 게재된 “[논문 제목: A brief review of the technology in piston machining to goal the product localization in Vietnam]” 논문을 기반으로 합니다. 1. 개요: 2. 초록: 최근 베트남 자동차 시장의 급격한 성장은 정부가 이 산업의 구축 및 발전에 정책 수립에 깊은 관심을 기울이고
![Die casting is mostly used because many parts need to be manufactured in a short amount of time (hundreds to thousands per day) with high accuracy. Parts like valve covers, wheels, transmission housings, engine block, wheel spacer, carburetor, impellers and fan clutch, alternator housing, airbag gas generator housing, etc. are all modes through the aluminum die casting method. Automobile parts require uniformity and high surface finish which can be accomplished by using casting methods that work in a controlled environment- pressure dies casting. Die casting was originally developed specifically for automotive applications [28]. The idea is to produce parts that are light, easy to handle, and cheap. Thus, die casting is widely applied to zinc and aluminum which are lighter than cast iron. Figure 2 shows the aluminum die-cast parts of a car. PEGASUS has been supplying quality aluminum die-cast auto parts to the automobile industry with our stable production system since we started this business in 2007 [27]. At present, we are supplying 60 kinds of die-cast products with our unique mold design and casting technology in addition to the processing technology we have been cultivating in the industrial sewing machine industry [29]. Aluminum or Al-Si alloys are used for Die casting. During this process, molten metal is injected at high pressure into a die (made of metal) which is a permanent mold comprising of two parts of the desired shape attached [30].](https://castman.co.kr/wp-content/uploads/Figure-2.-Application-of-die-casting-to-produce-auto-parts-27-570x342.png)