Tag Archives: 금형

Fig.1: An SEM image of an air-pore (A, right), associated with a region of micro-shrinkage porosity (A, left), alongside with a higher magnification view of the air-pore (B), showing the location that the EDX spectrum (C) was sampled from

고압 다이캐스팅의 숨겨진 결함 예측: LS-DYNA를 활용한 위치별 통계적 파괴 예측 기술

Towards Location Specific Statistical Fracture Prediction in High Pressure Die Castings 이 기술 요약은 R. Watson, W.D. Griffiths, T. Zeguer, S. Ruffle이 2015년 10th European LS-DYNA Conference에서 발표한 학술 논문 “Towards Location Specific Statistical Fracture Prediction in High Pressure Die Castings”를 기반으로 작성되었습니다. 키워드 Executive Summary 도전 과제: 이 연구가 HPDC 전문가에게 중요한 이유 고압

Read More

Fig. 1: A challenging task: simulating the casting process to predict component properties. The biggest benefit of the casting process is its ability to perform many tasks at the same time. However, it is also its biggest drawback, as many process parameters are linked to each other and have to be considered simultaneously.

주철 공정 시뮬레이션: 결함 예측부터 성능 최적화까지

Cast iron – a predictable material 이 기술 요약은 Jörg C. Sturm과 Guido Busch가 작성하여 2011년 CHINA FOUNDRY에 게재된 학술 논문 “Cast iron – a predictable material”을 기반으로 합니다. 키워드 Executive Summary 도전 과제: 이 연구가 주조 전문가에게 중요한 이유 오늘날 주조 산업은 전례 없는 변화에 직면해 있습니다. 자동차 파워트레인부터 풍력 터빈의 핵심 부품에 이르기까지,

Read More

Fig. 1. a) cross section of a slab with solidification cracks, b) Reflection configuration: Excitation laser and detection laser are arranged at the same spot. Ultrasonic waves are induced in the sample by an pulsed excitation laser (red), propagate through the sample and get reflected or scattered by interfaces (cracks, blowholes,…). The detection of reflected and scattered ultrasonic waves is realized with a two wave beam mixing interferometer (green). c) Transmission configuration: Excitation laser (red) and detection laser (green) are arranged at the opposite side of the sample.

Detection of Casting Defects in Aluminum Slabs by Laser Ultrasonic Measurements

실시간 결함 감지: 레이저 초음파 검사(LUS)가 알루미늄 주조의 품질을 혁신하는 방법 이 기술 요약은 Jürgen ROITHER 외 저자들이 2016년 19th World Conference on Non-Destructive Testing에서 발표한 “[Detection of Casting Defects in Aluminum Slabs by Laser Ultrasonic Measurements]” 논문을 기반으로 하며, CASTMAN의 기술 전문가들이 분석하고 요약했습니다. 키워드 Executive Summary The Challenge: 왜 이 연구가 HPDC 전문가에게

Read More

Figure 10: Simulation compared with real casting of cracks

자동차 산업의 생산 공정 최적화를 위한 시뮬레이션 적용

Apply simulation application optimize production process for car industry 결함률 제로에 도전: 자동차 엔진 블록 다이캐스팅 공정 최적화를 위한 시뮬레이션 활용법 이 기술 요약은 Phan Van Tong이 작성한 “[Apply simulation application optimize production process for car industry]” 논문을 기반으로 합니다. 키워드 Executive Summary 도전 과제: 왜 이 연구가 HPDC 전문가에게 중요한가? 자동차 부품은 경량화와 고성능화

Read More

Fig.1 - Picture of the casting used for the present study with indication of the analyzed areas.

Characterization of microstructural and mechanical properties of high-pressure die-cast en ac 46000 alloy

EN AC 46000 합금의 Cu 함량 최적화: 고압 다이캐스팅의 강도와 연성 극대화 이 기술 요약은 M. Tocci, S. Ferri, L. Montesano, A. Pola가 작성하여 La Metallurgia Italiana (2021)에 발표한 학술 논문 “Characterization of microstructural and mechanical properties of high-pressure die-cast en ac 46000 alloy”를 기반으로 합니다. CASTMAN이 기술 전문가를 위해 분석하고 요약했습니다. 키워드 Executive Summary

Read More

Fig. 1 – Isometric view subassembly gearbox cover and bracket Renault X95

자동차 기어박스 서스펜션 브래킷의 구조 및 기술 개선에 관한 연구

RESEARCHES CONCERNING CONSTRUCTIVE AND TECHNOLOGICAL IMPROVEMENTS OF AUTOMOTIVE GEARBOX SUSPENSION BRACKETS 고압 다이캐스팅(HPDC) 결함 최소화: 자동차 기어박스 브래킷의 다공성 결함을 해결하는 최적의 공정 조건 이 기술 요약은 Ferencz PETI와 Lucian GRAMA가 작성하여 2012년 Interdisciplinarity in Engineering International Conference “Petru Maior” University of Tîrgu Mureş, Romania, 2012에 발표한 학술 논문 “RESEARCHES CONCERNING CONSTRUCTIVE AND TECHNOLOGICAL IMPROVEMENTS

Read More

Fig. 4. EDX analysis of large iron particle

이차 AlSi7Mg0.3 합금의 특성에 대한 니켈 첨가의 영향

Influence of Nickel Addition on Properties of Secondary AlSi7Mg0.3 Alloy 고철(Scrap)을 고품질 부품으로: 니켈(Ni) 첨가로 이차 알루미늄 합금의 철(Fe) 불순물 문제 해결 이 기술 요약은 L. Richtárech 외 저자가 [Archives of Foundry Engineering]에 발표한 “Influence of Nickel Addition on Properties of Secondary AlSi7Mg0.3 Alloy” 논문을 기반으로 합니다. 키워드 Executive Summary 과제: 이 연구가 HPDC 전문가에게

Read More

Fig. 1. Specimen on the Plate

Effect of Yttrium on the Microstructure of Gravity Die Cast A356 Alloy

A356 합금의 한계를 넘다: 이트륨(Y) 첨가로 달성하는 결정립 미세화 및 기계적 특성 향상 이 기술 요약은 [Ying Pio Lim, Wei Hong Yeo]가 저술하여 [Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering (MCM 2015)] ([2015])에 발표한 학술 논문 “[Effect of Yttrium on the Microstructure of Gravity Die Cast A356 Alloy]”를 기반으로 합니다. 키워드

Read More

Fig.1: (a) If the liquid is under-cooled, a protuberance on the solid-liquid interface may grow rapidly as a dendrite. (b) Scanning electron micrograph of dendrites in steel.

주조 알루미늄 합금의 수지상정 구조 제어: 기계적 물성 극대화를 위한 핵심 파라미터

Parameters Influencing Dendritic Structure to Improve the Properties of As-Cast Aluminium Alloys 이 기술 요약은 [Indian Foundry Journal] ([2014])에 게재된 [Nisheeth Kr. Prasad, P. Kranthi Kumar, Ashok Sharma, M. K. Bhargava]의 학술 논문 “[Parameters Influencing Dendritic Structure to Improve the Properties of As-Cast Aluminium Alloys]”를 기반으로 합니다. 키워드 핵심 요약 도전 과제: 왜 이 연구가

Read More

Figure 2: Exposition of wheel hub in Light Metal Technology (LMT) conference, Gmunden, 2012 and CT scan of the magnesium wheel hub

CT 스캐닝을 활용한 HPDC 품질 예측: 주조 결함을 넘어 기계적 강도까지 시뮬레이션

An innovative use of CT method in light metals development 이 기술 요약은 Christoph Angermeier와 Amir M. Horr가 작성하여 iCT Conference 2014에 발표한 학술 논문 “An innovative use of CT method in light metals development”를 기반으로 합니다. 키워드 Executive Summary 도전 과제: 이 연구가 HPDC 전문가에게 중요한 이유 고압 다이캐스팅(HPDC) 공정에서 생산된 부품의 기계적 강도와

Read More