Fig. 6. Short shot with 25% volume fill: simulation (top) with colour representing viscosity, blue being low and red high; and experiment (bottom). For TDIE = 27 C and liquid metal super-heat TAL = 0 C. (For interpretation of the references to colour in this figure legend, the reader is referred to the web version of this article.)

Published at 399 × 851 in Short shots and industrial case studies-Understanding fluid flow and solidification in high pressure die casting

Fig. 6. Short shot with 25% volume fill: simulation (top) with colour representing viscosity, blue being low and red high; and experiment (bottom). For TDIE = 27 C and liquid metal super-heat TAL = 0 C. (For interpretation of the references to colour in this figure legend, the reader is referred to the web version of this article.)

Fig. 6. Short shot with 25% volume fill: simulation (top) with colour representing viscosity, blue being low and red high; and experiment (bottom). For TDIE = 27 C and liquid metal super-heat TAL = 0 C. (For interpretation of the references to colour in this figure legend, the reader is referred to the web version of this article.)

Fig. 6. Short shot with 25% volume fill: simulation (top) with colour representing viscosity, blue being low and red high; and experiment (bottom). For TDIE = 27 C and liquid metal super-heat TAL = 0 C. (For interpretation of the references to colour in this figure legend, the reader is referred to the web version of this article.)