Figure 1. Simulation model of the propeller LPDC process: (a) 3D wireframe image of the 3D mesh; (b) vertical central cross-section mesh of the 3D solid mesh; and (c) mesh of the propeller part.

Published at 1435 × 891 in Development of Low-Pressure Die-Cast Al-Zn-Mg-Cu Alloy Propellers Part II: Simulations for Process Optimization

Figure 1. Simulation model of the propeller LPDC process: (a) 3D wireframe image of the 3D mesh; (b) vertical central cross-section mesh of the 3D solid mesh; and (c) mesh of the propeller part.

Figure 1. Simulation model of the propeller LPDC process: (a) 3D wireframe image of the 3D mesh;
(b) vertical central cross-section mesh of the 3D solid mesh; and (c) mesh of the propeller part.

Figure 1. Simulation model of the propeller LPDC process: (a) 3D wireframe image of the 3D mesh;
(b) vertical central cross-section mesh of the 3D solid mesh; and (c) mesh of the propeller part.