Tag Archives: High pressure die casting (HPDC)

Fig. 3.10.: Test procedure

高圧ダイカスト用途向け Al-Si9-Cu3-Fe1 合金の微細構造と特性に及ぼすアルミナ (Al2O3) および二ホウ化チタン (TiB2) ナノ粒子の影響

この紹介論文は、Université Bordeaux I によって出版された論文「Influence of Alumina (Al2O3) and Titanium Diboride (TiB2) nanopartic

Read More

ダイカスト部品のキャビティおよび複合鋳造 – 数値設計手法と実験的検証

本紹介論文は、[Publisher]によって出版された論文「Hohl- und Verbundguss von Druckgussbauteilen – Numerische Auslegungsmethoden und

Read More

Figure 4.5: Tensile bar die casting in which hot shear specimens were taken from the middle of the reduced section of the tensile bars.

アルミニウム高圧ダイカストにおける高温強度がはんだ付けを低減する

この紹介論文は、[Open Access Dissertation] が発行した [“High Temperature Strength Reduces Soldering In Aluminum High Pressu

Read More

Figure 9- Left: Schematics of a conventional HPDC cold chamber machine [14]; Right: Typical layout of a component produced by a cold chamber machine [15].

高圧ダイカストによるZamak合金

この紹介論文は、[FEUP FACULDADE DE ENGENHARIA UNIVERSIDADE DO PORTO] によって発行された論文「高圧ダイカストによるZamak合金(High Pressure Die C

Read More

Bild 1. Einordnung der Karosseriebauweise „Mega-Casting" und dessen Konzepte mit beispielhaften OEM und Modellen im Rahmenwerk der etablierten Karosseriebauweisen (Eigenleistung). Rahmenwerk und Teil-Darstellungen in Anlehnung an Birkert et al. [3], Stellantis [14], Land Rover [15], Tesla [5]. Grafik: WZL

自動車生産におけるメガキャスティングの機会とリスク – アルミニウムダイカスト製白車体

この紹介記事は、[WT Werkstattstechnik]によって発行された論文「自動車生産におけるメガキャスティングの機会とリスク – アルミニウムダイカスト製白車体」の研究内容を紹介するものです。 1. 概要: 2

Read More

Figure 1. (a) Image of “test specimen” HPDC die used in this study, (b) Image of “test specimen” casting using Nemalloy HE700.

Development of High Ductility Al-Zn-Mg Casting Alloys for Automotive Structural Components

この紹介記事は、[MS&T19®]によって発行された論文[“Development of High Ductility Al-Zn-Mg Casting Alloys for Automotive Structural

Read More