Tag Archives: aluminum alloys

Fig. 1. Life cycle assessment flow-chart.

高圧ダイカスト安全関連自動車部品のクレードルゲート影響評価

1. 概要: 2. 研究背景: 3. 研究目的および研究質問: 4. 研究方法論: 5. 主要な研究結果: 6. 結論および考察: 7. 今後のフォローアップ研究: 8. 参考文献: 9. 著作権: 本資料は上記の論文に

Read More

Fig. 1: Illustration of engine block with 6 ingates and the vacuum channels.

Al-Siダイカストエンジンブロックの微細構造と機械的特性の相関

1. 概要: 2. 研究背景: 3. 研究目的及び研究質問: 4. 研究方法論: 5. 主な研究結果: 6. 結論及び考察: 7. 今後の後続研究: 8. 参考文献: [1] Colás, R., A. Rodrígue

Read More

Fig. 1. Squeeze casting device.

溶湯鍛造時における低温塩コア適用時の加圧力の影響

1. 概要: 2. 研究背景: 3. 研究目的および研究質問: 4. 研究方法論: 5. 主要研究結果: 6. 結論および考察: 7. 今後の後続研究: 8. 参考文献: 9. 著作権: *本資料は、[イ・ジュノ、ムン・

Read More

Fig. 3: Application of Mg alloys center console frame in automobile: (a) Porsche [6]; (b) Volvo; (c) Hongqi

薄肉大型乗用車コックピット用マグネシウム合金ダイカスト:用途、材料、製造

1. 概要: 2. 研究背景: 3. 研究目的および研究課題: 4. 研究方法論 5. 主な研究成果: 6. 結論および考察: 7. 今後のフォローアップ研究: 8. 参考文献: 9. 著作権表示: 本資料は、Feng

Read More

Figure 2.6: Teslas’ and Volvos’ mega-castings of the rear floor

メガキャスト製品の品質向上:幾何学的変動要因の特定

1.概要: 2. 研究背景: 世界的な環境問題への意識の高まりを受け、自動車業界では軽量化技術がますます重要になっています。特に電気自動車(EV)の普及に伴い、バッテリー重量増加による航続距離の短縮が課題となっており、軽

Read More

Figure 5 Aluminum wiring in automotive vehicles: a time line of application of aluminum in automotive wiring, reproduced from [53]; b high-strength aluminum alloy wire installed in the engine harness, reproduced from [57]; c die-cast aluminum coil for motor winding with seven turns and a conductor height of approx. 1.5 mm along with d coil arrangement, reproduced from [264]; e hairpin motor using aluminum V-cat windings, reproduced from [59]; f insulated and bare AA1350 aluminum of 7 AWG square tested for hairpin winding of electric motors and copper wire for comparison along with stress vs strain elongation curves, reproduced from [11].

アルミ合金の電気工学への応用:レビュー

1. 概要: 2. 研究背景: 現代のインフラ、製造、輸送(電気自動車を含む)における電力伝送の経済的かつ環境的に持続可能な方法のために、高性能導体は不可欠です。従来から銅導体が主流でしたが、アルミは電力送電・配電におい

Read More

Figure 1. Fin designs on heat sinks: left with all parallel fins, right with angled fins increasing turbulence in the air (cooling medium) and increasing air exchange between the fins to maximize cooling [2].

真空レオキャスティングによる大幅に性能が向上したヒートシンク

1. 概要 2. 研究背景 電気自動車、通信、電子機器など様々な産業において、ヒートシンクの需要と性能要求が大幅に増加している。ヒートシンクの主要な要求事項は熱伝導率であるが、純アルミニウムは熱伝導率が高いものの、鋳造が

Read More

Figure 31. Photograph of high-ceiling LED lamp heat sink cast using Al-25%Si.

Al-25%Siを用いた軽量薄フィンヒートシンクのダイカスト

1.概要: 2. 研究背景: 軽量でコスト効率の良いヒートシンクの需要が高まっている。複雑な形状のヒートシンクを経済的に製造する一般的な方法はダイカストである。重量を軽減するために、ヒートシンクのフィンとベースを薄くする

Read More

Die tool: (a) both tool half and the vacuum valve connection; (b) vacuum unit.

真空支持がAlSi9Cu3(Fe)アルミニウム合金ダイカストの疲労寿命に及ぼす影響

– 研究の核心目的: 高圧ダイカスト(HPDC)と真空補助ダイカスト(VPDC)プロセスで製造されたAlSi9Cu3(Fe)アルミニウム合金ダイカストの高サイクル疲労挙動を比較し、鋳造欠陥が疲労破壊に及ぼす影響

Read More