Tag Archives: aluminum alloy

Parametric Optimization of Casting Surface Roughness Produced by Ceramic Shell Investment Casting Process

By user2025/10/23Aluminium-J, Technical Data-Jaluminum alloy, ANOVA, Applications, CAD, Efficiency, Microstructure, Quality Control, Review, Sand casting, STEP, Taguchi method

インベストメント鋳造の表面粗さを2.09µmに！Al-7%Si合金の品質を最大化する田口メソッドによるパラメータ最適化この技術概要は、Balwinder Singh氏、Pardeep Kumar氏、B.K. Mishr

COMPARISON OF MICROSTRUCTURE AND TENSILE PROPERTY OF SILAFONT-36 AND MERCALOY 367 IN A REAR CROSS MEMBER PROTOTYPE CASTING USING HPDC PROCESS

By user2025/10/22Aluminium-J, Technical Data-JAl-Si alloy, aluminum alloy, aluminum alloys, Aluminum Casting, CAD, Die casting, High pressure die casting, High pressure die casting (HPDC), Microstructure, Quality Control, 금형, 자동차 산업

構造用Al-Si合金の比較：Silafont-36 vs. Mercaloy 367 – HPDCにおける性能と微細構造の徹底分析この技術概要は、K Sadayappan氏らによる学術論文「COMPARISON OF

Analysis of the Increased Iron Content on the Corrosion Resistance of the AlSi7Mg0.3 Alloy Casting

By user2025/10/21Aluminium-J, Technical Data-JAl-Si alloy, Alloying elements, aluminum alloy, aluminum alloys, Applications, CAD, Die casting, Microstructure, Quality Control, 자동차 산업

AlSi7Mg0.3合金の耐食性：鉄（Fe）含有量の増加は本当に問題か？本技術概要は、Jaroslava Svobodova氏らによる学術論文「Analysis of the Increased Iron Conten

THE EFFECT OF WATER MIST COOLING OF CASTING DIE ON THE SOLIDIFICATION, MICROSTRUCTURE AND PROPERTIES OF AlSi20 ALLOY

By user2025/10/19Aluminium-J, Technical Data-JAl-Si alloy, aluminum alloy, aluminum alloys, Aluminum Casting, CAD, Die casting, High pressure die casting, Microstructure, Permanent mold casting, Quality Control, secondary dendrite arm spacing

AlSi20合金の品質を劇的に向上させる金型水ミスト冷却技術：凝固時間50%短縮の秘密本技術概要は、[R. WŁADYSIAK, A. KOZUŃ, T. PACYNIAK]によって執筆され、[Arch. Metall

局所加圧を併用した低圧鋳造法により製造されたA356合金ホイールの微細組織と特性

By user2025/10/18Aluminium-J, automotive-J, Technical Data-JAl-Si alloy, aluminum alloy, aluminum alloys, CAD, Die casting, Microstructure, Review, secondary dendrite arm spacing, STEP, 자동차

この紹介資料は、「Journal of Materials Engineering and Performance (JMEPEG), ASM International」によって発行された論文「Microstructu

Austempered Ductile Iron (ADI) – A Green Alternative

By user2025/10/17Aluminium-J, Technical Data-Jaluminum alloy, aluminum alloys, CAD, Casting Technique, Efficiency, Mechanical Property, Quality Control, radiator, Review, Sand casting

ADI（オーステンパー処理ダクタイル鋳鉄）：アルミニウムを超える軽量化とコスト削減を実現するグリーンな代替案この技術概要は、John R. Keough氏（PEng, FASM）によって執筆され、2010年4月に公開さ

金属スポンジ鋳造品の洗浄

By user2025/10/17Aluminium-Jaluminum alloy, Applications, CAD, Efficiency, Quality Control, STEP

Beyond the Acid Bath: Faster, Greener Cleaning Methods for Complex Metal Sponge Castings この技術概要は、Václav MERTA氏

スクイーズ鋳造におけるアスペクト比がアルミニウム合金の機械的特性に与える影響

By user2025/10/17Aluminium-J, Technical Data-JAl-Si alloy, aluminum alloy, aluminum alloys, Aluminum Casting, CAD, Die casting, Mechanical Property, Microstructure, Quality Control, Taguchi method, 금형

Impact of Aspect Ratio on the Mechanical Properties of Squeeze-Cast Aluminum Alloys 本技術概要は、S.S. Mutar氏およびN.S.

重力ダイカストの湯口方案設計：シミュレーションによるピストン欠陥の克服

By user2025/10/17Aluminium-J, Technical Data-Jaluminum alloy, Aluminum Casting, CAD, CFD, Computational fluid dynamics (CFD), Die casting, Quality Control, Review, Sand casting, STEP, 금형

DESIGN OF GATING SYSTEM ON PISTON OF MOBIL SINJAI WITH GRAVITY DIE CASTING METHOD 本技術概要は、Rizki Yustisiabellah氏

軽量ホイールハブの設計と車両燃費改善に関する研究

By user2025/10/16Aluminium-J, Technical Data-Jaluminum alloy, Applications, AUTOMOTIVE Parts, CAD, Efficiency, Magnesium alloys, Quality Control, Review, Sand casting, 금형, 자동차 산업

Research on Lightweight Wheel Hub Design and Its Improvement on Vehicle Fuel Economy 本技術概要は、Simin Wang氏が『Inter