Tag Archives: Aluminum Casting

Figure 1. Aluminum in the automotive industry, model Audi A2

自動車の軽量化を加速する『自動車用アルミニウム合金』の最前線:ホイールリムへの応用を中心に

Application of Aluminum and ITS Alloys in the Automotive Industry With Special Emphasis PN Wheel Rims この技術概要は、

Read More

Fig.1 - Schematic representation of samples drawn from the two different spokes. For confidentiality reasons, the real wheel cannot be shown so a schematic representation is given.

Al-Si-Mg鋳造品の機械的特性を予測するモデルの開発

アルミ鋳造シミュレーションモデル:設計段階で最終製品の強度を正確に予測 本技術概要は、C. Ransenigo、M. Tocci、C. Viscardi、M. Serafini、A. Polaによる学術論文「Develo

Read More

Fig. 1. a) cross section of a slab with solidification cracks, b) Reflection configuration: Excitation laser and detection laser are arranged at the same spot. Ultrasonic waves are induced in the sample by an pulsed excitation laser (red), propagate through the sample and get reflected or scattered by interfaces (cracks, blowholes,…). The detection of reflected and scattered ultrasonic waves is realized with a two wave beam mixing interferometer (green). c) Transmission configuration: Excitation laser (red) and detection laser (green) are arranged at the opposite side of the sample.

Detection of Casting Defects in Aluminum Slabs by Laser Ultrasonic Measurements

鋳造欠陥のリアルタイム検出:レーザー超音波探傷がアルミニウムスラブの品質をどう変えるか この技術概要は、Jürgen ROITHER氏らによって執筆され、「19th World Conference on Non-Des

Read More

Figure 10: Simulation compared with real casting of cracks

自動車産業向け生産プロセスを最適化するシミュレーションアプリケーションの適用

Apply simulation application optimize production process for car industry ダイカストシミュレーションで生産を最適化:自動車産業における欠陥予測と品

Read More