Tag Archives: A380

Fig. 3: Images from the FE thermal model, predicting the temperature field during FSP at (a) 300 RPM and (b) 700 RPM with a travel speed of 200 mm min⁻¹. The dotted line illustrates the position of the tool pin.

Al-Si合金のFSPにおける組織均一性の定量化と粒子微細化のメカニズム

FSPによるAl-Si合金の粒子微細化メカニズムと組織均一性の定量化:数値モデリングと実験的アプローチ この技術概要は、Chun Y. Chan氏およびPhilip B. Prangnell氏によって発表された学術論文「

Read More

Figure 4. Cold Chamber Process (Groover, 2007)

Process and Tool Design for the High Integrity Die Casting of Aluminum and Magnesium Alloys

高整合性ダイカストにおけるプロセス・金型設計:アルミニウム・マグネシウム合金の鋳造欠陥を克服する 本テクニカルブリーフは、Varun Nandakumar氏が2014年にオハイオ州立大学大学院に提出した修士論文「Proc

Read More

Mega and Giga Casting: A New Technological Paradigmfor DieMaterialand Design

メガおよびギガキャスティング:ダイの材料と設計のための新しい技術パラダイム

本紹介論文は、「The 75th World Foundry Congress」が発行した論文「Mega and Giga Casting: A New Technological Paradigm for Die Ma

Read More

Fig. 1. The components of intermetallic phases examined using XRD and TEM in the Mg4LaxAl (x ¼ 08, wt.%) alloys fabricated by gravity die casting. The purple dotted lines correspond to the critical Al/La ratio for the formation of certain simplex intermetallic phase, and the dotted gray area corresponds to the Al/La range where only Mg12La phase forms. (For interpretation of the references to color in this figure legend, the reader is referred to the Web version of this article.)

Developing a die casting magnesium alloy with excellent mechanical performance by controlling intermetallic phase

1. 概要: 2. 研究背景: 3. 研究目的と研究課題: 4. 研究方法 5. 主な研究成果: 6. 結論と考察: 7. 今後のフォローアップ研究: 8. 参考文献: 9. 著作権: この資料は上記の論文に基づいて要約

Read More