Tag Archives: secondary dendrite arm spacing

Table 3-1 Solid solubility of elements in aluminum [2]

Al-Si-Cu 합금 미세조직 제어: 주조 품질을 한 단계 끌어올리는 핵심 변수 분석

본 기술 요약은 Jelena Pavlovic-Krstic의 박사학위 논문 “Impact of casting parameters and chemical composition on the solidification behaviour of Al-Si-Cu hypoeutectic alloy” (2010, 오토폰게리케 마그데부르크 대학교)를 기반으로 합니다. CASTMAN이 AI의 도움을 받아 기술 전문가를 위해 분석 및 요약했습니다. 키워드 핵심 요약 바쁜 전문가들을 위한 30초 요약입니다. 과제: 이 연구가 HPDC 전문가에게 왜 중요한가? 자동차 및

Read More

Fig. 1. Schematic of Continuous Rod Casting Machine

주조 공정 최적화의 4가지 핵심 요소: 구리 합금 연구에서 배우는 고압 다이캐스팅(HPDC) 교훈

본 기술 요약은 Bagherian, E-R., Fan, Y., Cooper, M., Frame, B., & Abdolvand, A.가 Metallurgical Research and Technology(2016)에 발표한 학술 논문 “Effect of water flow rate, casting speed, alloying elements and pull distance on tensile strength, elongation percentage and microstructure of continuous cast copper alloys”를 기반으로 합니다. 이 내용은 고압 다이캐스팅(HPDC) 전문가를 위해 CASTMAN이 AI의

Read More

Figure 3.23 Demo-axial sample as a compound casting, a) Steel insert positioned in a squeeze casting mould [58], b) Steel insert (top) and compound casting [58], c) Cross section of the sample [57]

Al-Si 합금 주물 내 강철 인서트의 계면

본 소개 자료는 “Dissertation, Technischen Universität Wien, Fakultät für Maschinenwesen und Betriebswissenschaften”에서 발행된 “Interface of steel inserts in Al-Si alloy castings” 논문을 기반으로 합니다. 1. 개요: 2. 초록: 알루미늄 합금은 낮은 밀도와 우수한 기계적 특성으로 인해 매우 중요한 재료입니다. 알루미늄 실리콘 주조 합금은 자동차, 항공 우주 및 엔지니어링 분야에 필수적입니다. 알루미늄 실리콘 합금은 주조 공정에

Read More

미세조직 특징, 결함 및 표면 품질이 Al-Si-Mg 주조 합금의 피로 성능에 미치는 영향

본 소개 논문은 “Jönköping University, School of Engineering, Dissertation Series No. 084″에서 발행한 “The Effect of Microstructural Features, Defects and Surface Quality on the Fatigue Performance in Al-Si-Mg Cast Alloys” 논문을 기반으로 합니다. 1. 개요: 2. 초록: 지구 온난화로 인해 산업계는 이산화탄소(CO2) 배출을 줄이기 위해 더 가벼운 부품을 제조해야 하는 상황에 직면해 있습니다. 이를 달성하기

Read More

Fig. 19—Appearance of Chinese script a-Fe compound in: (a) OM image of an as-cast part, and (b) SEM image of a tensile tested part.

Inhomogeneous Skin Formation and Its Effect on the Tensile Behavior of a High Pressure Die Cast Recycled Secondary AlSi10MnMg(Fe) Alloy

본 소개 자료는 “[Journal/academic society of publication]”에 게재된 “[Inhomogeneous Skin Formation and Its Effect on the Tensile Behavior of a High Pressure Die Cast Recycled Secondary AlSi10MnMg(Fe) Alloy]” 논문을 기반으로 작성되었습니다. 1. 개요: 2. 초록: 본 연구는 고압 다이캐스팅(HPDC)으로 제조된 새로운 2차 합금의 미세조직 변화, 기계적 특성 및 파괴 거동을 조사했습니다. 주조 상태의 미세조직은 (i)

Read More

Figure 1. SDAS definition: the distance between two secondary dendrites.

컴퓨터 비전을 이용한 주조 미세조직 검사: 알루미늄 합금의 덴드라이트 간격

이 소개 자료는 “[Metals]”에 게재된 논문 “[Casting Microstructure Inspection Using Computer Vision: Dendrite Spacing in Aluminum Alloys]”를 기반으로 합니다. 1. 개요: 2. 초록: 본 논문은 컨볼루션 신경망(CNNs)을 이용한 2차 덴드라이트 수지상 간격(SDAS) 측정을 연구합니다. 산업적으로 수용 가능한 예측 정확도를 가진 SDAS 예측용 딥러닝(DL) 모델 구축을 목표로 했습니다. 모델은 고압 다이캐스팅 합금 EN AC 46000 AlSi9Cu3(Fe),

Read More

Figure 1. Hybrid HPDC casting with gating system, casting and metal sheet. The metal sheet is connected to the casting by the surface contour of the metal sheet (ribs), which is filled by the melt.

다이캐스팅 공법으로 생산된 하이브리드 경금속 구조물의 멀티스케일 시뮬레이션

이 소개 자료는 “[IOP Conference Series: Materials Science and Engineering]”에 게재된 “Multi-scale simulation of hybrid light metal structures produced by high pressure die casting” 논문을 기반으로 합니다. 1. 개요: 2. 초록: 최신 자동차 구조 부품에서는 경량이면서 기계적으로 안정적인 구조를 구현하기 위해 금속 판재와 주조 부품을 결합합니다. 본 연구에서는 강철 판재와 알루미늄 주조 부품 간의 접합이

Read More

Effects of microstructure and casting defects on the fatigue behavior of the high-pressure die-cast AlSi9Cu3(Fe) alloy

고압 다이캐스팅 AlSi9Cu3(Fe) 합금의 피로 거동에 미치는 미세구조 및 주조 결함의 영향

본 논문 요약은 [‘고압 다이캐스팅 AlSi9Cu3(Fe) 합금의 피로 거동에 미치는 미세구조 및 주조 결함의 영향’] 논문을 [‘Procedia Structural Integrity’]에 발표된 내용을 기반으로 작성되었습니다. 1. 개요: 2. 연구 배경: 연구 주제 배경: 고압 다이캐스팅(HPDC) 부품은 “우수한 유연성과 높은 생산성”으로 인해 자동차 산업을 중심으로 사용이 증가하고 있습니다. 이러한 특성으로 인해 HPDC는 특히 자동차 분야에서 복잡한 형상과 우수한

Read More

Fig. 3.10.: Test procedure

알루미나(Al2O3) 및 이붕화티타늄(TiB2) 나노입자가 고압 다이캐스팅용 Al-Si9-Cu3-Fe1 합금의 미세구조 및 특성에 미치는 영향

본 소개 논문은 Université Bordeaux I에서 발행한 논문 “Influence of Alumina (Al2O3) and Titanium Diboride (TiB2) nanoparticulates on the microstructure and properties of Al Si9 Cu3 Fe1 alloys for high pressure die casting applications”의 연구 내용입니다. 1. 개요: 2. 요약 본 연구의 주요 목적은 TiB2 및 Al2O3 나노 입자(최대 1 wt. %)가 고압 다이캐스팅 공정을

Read More

Fig.4 Grain orientation and grain boundary distribution at position A under different cooling rates

냉각 속도가 ADC12 합금 응고 조직 및 성능에 미치는 영향

본 소개 내용은 [Special Casting & Nonferrous Alloys]에서 발행한 [“냉각 속도가 ADC12 합금 응고 조직 및 성능에 미치는 영향”] 의 연구 내용입니다. 1. 개요: 2. 초록 / 서론 초록: 방향성 응고 실험을 통해 ADC12 알루미늄 합금의 응고 조직 진화 및 기계적 성질에 미치는 냉각 속도의 영향을 연구했습니다. 결과는 냉각 속도가 증가함에 따라 ADC12 알루미늄 합금의

Read More