Tag Archives: Mechanical Property

Fig. 1. Integrated fully automatic HPDC cell: (a) furnace, melt feeding and casting extraction; (b) heating, cooling and spraying units; (c) HPDC die and die temperature control systems.

고압 다이캐스팅이 초대형 박육 알루미늄 합금 주조품의 충전성, 결함 및 기계적 특성에 미치는 영향

초대형 박육 다이캐스팅의 한계 돌파: 유효 충전 길이(EFL) 개념을 통한 기계적 특성 균일성 확보 전략 이 기술 요약은 Zhichao Niu, Guangyu Liu, Tian Li, Shouxun Ji가 저술하여 Journal of Materials Processing Tech. (2022)에 발표한 학술 논문 “Effect of high pressure die casting on the castability, defects and mechanical properties of aluminium alloys in extra-large thin-wall

Read More

Fig.1. Six mega Al castings in Cadillac Celestiq [3].

Ultra-Large Aluminum Castings in Automobiles

자동차 기가 캐스팅의 미래: 초거대 알루미늄 주조의 품질과 생산성 극대화 방안 이 기술 요약은 Qigui Wang, Andy Wang, Jason Coryell이 작성하여 2024년 제75회 세계 주조 대회(The 75th World Foundry Congress)에 발표한 “[Ultra-Large Aluminum Castings in Automobiles]” 논문을 기반으로 작성되었습니다. 키워드 Executive Summary The Challenge: 왜 이 연구가 HPDC 전문가에게 중요한가? 최근 자동차 산업, 특히 전기차

Read More

Fig.1 - Schematics of the casting moulds: (a) Chill sample and (b) PCM sample.

상변화물질(PCM)을 이용한 혁신적인 응고 제어: Al-Cu 합금 주조의 거시조직을 정밀하게 설계하는 방법

Numerical simulation of the effects of a Phase Change Material (PCM) on solidification path of gravity sand cast Al-Cu alloy 이 기술 요약은 Z. Noohi, B. Niroumand, G. Timelli가 작성하여 La Metallurgia Italiana (2021)에 발표한 학술 논문 “Numerical simulation of the effects of a Phase Change Material (PCM) on solidification path of gravity sand cast

Read More

Figure 2: Hardness Testing Specimen

Mechanical Properties of Al6061- Al2O3 Metal Matrix Composite Using Die Casting Technique

다이캐스팅 공법으로 Al6061-Al2O3 복합재의 기계적 특성 극대화: 12% 강화재 첨가의 최적점 발견 이 기술 요약은 Mahendra HM 외 저자가 [Journal of Material Science and Metallurgy]에 발표한 학술 논문 “[Mechanical Properties of Al6061- Al2O3 Metal Matrix Composite Using Die Casting Technique]” (2018)을 기반으로 하며, CASTMAN의 기술 전문가가 분석 및 요약하였습니다. 키워드 Executive Summary 도전 과제: 이

Read More

Fig. 1. Recycled ingots

A356 알루미늄 재활용의 한계점 돌파: 30% 칩 첨가로 기계적 물성을 향상시키는 방법

Effect of Chip Amount on Microstructural and Mechanical Properties of A356 Aluminum Casting Alloy 이 기술 요약은 [A.Y. Kaya 외], [ARCHIVES of FOUNDRY ENGINEERING] ([2021])에 게재된 “[Effect of Chip Amount on Microstructural and Mechanical Properties of A356 Aluminum Casting Alloy]” 논문을 기반으로 작성되었습니다. 키워드 Executive Summary 도전 과제: 이 연구가 HPDC 전문가에게 중요한 이유 자동차

Read More

Figure 6: An ADI prototype bracket with a continuous 3mm wall.

오스템퍼링 구상흑연주철(ADI) – A Green Alternative

Austempered Ductile Iron (ADI) – A Green Alternative 이 기술 요약은 John R. Keough, PEng, FASM이 작성하여 2010년 4월에 발표한 “[Austempered Ductile Iron (ADI) – A Green Alternative]” 논문을 기반으로 합니다. 키워드 Executive Summary 도전 과제: 왜 이 연구가 전문가들에게 중요한가? 지속가능한 ‘친환경’ 설계 논의에서 무게 절감은 항상 최우선 과제로 꼽힙니다. 이로 인해 많은 엔지니어들이

Read More

Figure 1. Used molds and presses

스퀴즈 캐스팅 알루미늄 합금의 기계적 특성에 대한 형상비의 영향

Impact of Aspect Ratio on the Mechanical Properties of Squeeze-Cast Aluminum Alloys 이 기술 요약은 S.S. Mutar와 N.S. Abtan이 작성하여 International Journal on “Technical and Physical Problems of Engineering” (IJTPE) (2023)에 게재한 학술 논문 “IMPACT ASPECT RATIO ON MECHANICAL PROPERTIES OF ALUMINUM ALLOY PRODUCED BY SQUEEZE CASTING PROCESS”를 기반으로 합니다. 키워드 Executive Summary 도전 과제:

Read More

Figure 1 The aluminium life cycle

소비 후 알루미늄 스크랩의 화학 성분 – 알루미늄 재활용의 과제

The Chemical Composition of Post-Consumer Aluminium Scrap – A Challenge in Aluminium Recycling 이 기술 요약은 Ciprian Bulei, Imre Kiss, Mihai–Paul Todor가 작성하여 Acta Polytechnica Hungarica (2023)에 게재한 학술 논문 “The Chemical Composition of Post-Consumer Aluminium Scrap – A Challenge in Aluminium Recycling”을 기반으로 합니다. 키워드 Executive Summary 과제: 왜 이 연구가 HPDC 전문가에게 중요한가

Read More

Fig. 2 Macrostructure of AlSi10.5Cu1.2Mn0.8Ni1.2Pb0.5 alloy a) sand mold b) metal mold

The Effect of Casting Mold Material on Microstructure of Al-Si Alloys

주형 재료 선택: Al-Si 합금 미세조직 및 기계적 특성 최적화의 핵심 이 기술 요약은 Tomas Vlach, Jaromir Cais가 저술하여 2022년 Manufacturing Technology에 게재한 학술 논문 “The Effect of Casting Mold Material on Microstructure of Al-Si Alloys”를 기반으로 합니다. CASTMAN이 기술 전문가를 위해 분석하고 요약했습니다. 키워드 핵심 요약 도전 과제: 이 연구가 HPDC 전문가에게 중요한 이유

Read More

Figure 1. Photographs of the die-casting die used for manufacturing mechanical parts after the diecasting operation, showing (a) the die cavity and heat-checking and (b) the core pin.

MATERIAL PROPERTIES OF DIE-CASTING DIE AROUND HEAT-CHECKING CREATED BY A HIGH-PRESSURE ALUMINUM ALLOY DIE-CASTING OPERATION

금형 히트체크의 숨겨진 원인: 압축 응력이 치명적인 인장 응력으로 전환되는 메커니즘 분석 이 기술 요약 자료는 Mitsuhiro Okayasu와 Junya Shimazu가 저술하여 International Journal of Metalcasting (2025)에 게재한 학술 논문 “MATERIAL PROPERTIES OF DIE-CASTING DIE AROUND HEAT-CHECKING CREATED BY A HIGH-PRESSURE ALUMINUM ALLOY DIE-CASTING OPERATION”을 기반으로 합니다. CASTMAN이 AI의 도움을 받아 기술 전문가를 위해 분석하고 요약했습니다.

Read More