Tag Archives: STEP

Fig. 2. Structure of the sand cast alloy(top left) and anodic layer (top right) and structure of the high pressure cast (bottom left) and anodic layer (bottom right) produced on the composite EN-ACAlSi9Cu3

高圧ダイカスト vs. 砂型鋳造:アルマイト処理後のAlSi9Cu3合金の耐摩耗性と硬度を最大化する方法

高圧ダイカスト vs. 砂型鋳造:アルマイト処理後のAlSi9Cu3合金の耐摩耗性と硬度を最大化する方法 本技術概要は、[J. KONIECZNY, K.LABISZ, M. POLOK-RUBINIEC, A. WŁO

Read More

Fig. 5. Simulation of filling a thin-wall casting mould when filled in: (a) 15%; (b) 30%; (c) 50%; (d) 70%; (e) 100%; and (f) in the course of casting solidification

The Effect of a Thin-Wall Casting Mould Cavity Filling Conditions on the Casting Surface Quality

薄肉鋳物の表面品質を脅かす「コールドショット」:鋳造シミュレーションが解き明かす根本原因と対策 本技術概要は、A. Trytek氏らによる学術論文「The Effect of a Thin-Wall Casting Mo

Read More

Fig. 1. Prototype vehicle and the swing arm

Development and optimization of casting technology on part of the suspension of a heavy vehicle used in difficult environmental wetland conditions

論文タイトル シミュレーション主導の鋳造設計:大型車両サスペンション部品の15%軽量化と開発期間短縮を実現 この技術概要は、Marcin Małysza氏らによって執筆され、TRANSACTIONS OF FO

Read More

Figure 1. Cast aluminium (LM24) clutch housing component.

コンフォーマル冷却は本当にダイカストのサイクルタイムを短縮するのか?シミュレーションと実証実験による性能分析

この技術概要は、[A. J. Norwood]氏らが[International Journal of Computer Integrated Manufacturing]誌に発表した学術論文「[Analysis of

Read More

Fig. 1 Typical Sensor Recordings from a Casting Process

Reduction of rejects by combining data from the casting process and automatic X-ray inspection

AIを活用した鋳造プロセス最適化:プロセスデータとX線検査の連携による不良率削減の新手法 本技術概要は、[Thomas STOCKER氏ら]によって執筆され、[e-Journal of Nondestructive Te

Read More

Fig.9. Short shot experiments proved that it is vital to simulate shot sleeve process before cavity filling simulations.

気孔欠陥の削減:HPDCショットスリーブシミュレーション最適化ガイド

この技術要約は、Matti Sirviö、Sami Vapalahti、およびJukka Väinölä(VTT Industrial Systems)によって発表された学術論文「Complete Simulation

Read More