Tag Archives: secondary dendrite arm spacing

Fig. 2 Percentage contribution of factors

ショットスリーブの寿命を延ばす：アルミダイカスト向け直接レーザー蒸着（DLD）プロセスの最適化

By Aluminium-J, Technical Data-J, , , , , , , , , , , ,

Optimization of Direct Laser Deposition Process for Shot Sleeves Used in Aluminium Diecasting この技術概要は、[Bibin B

Read More

Fig.1 - Schematic representation of samples drawn from the two different spokes. For confidentiality reasons, the real wheel cannot be shown so a schematic representation is given.

Al-Si-Mg鋳造品の機械的特性を予測するモデルの開発

By Aluminium-J, Technical Data-J, , , , , , , , , ,

アルミ鋳造シミュレーションモデル：設計段階で最終製品の強度を正確に予測 本技術概要は、C. Ransenigo、M. Tocci、C. Viscardi、M. Serafini、A. Polaによる学術論文「Develo

Read More

Figure 5a. Locations (A and B) for the micrographs in Figure 5b

自動車用途における信頼性を達成するためのマグネシウムダイカストプロセスの最適化

By Aluminium-J, automotive-J, Technical Data-J, , , , , , , , , ,

この紹介記事は、”[Optimizing the Magnesium Die Casting Process to Achieve Reliability in Automotive Applications]”という論

Read More

Fig.1 - Picture of the casting used for the present study with indication of the analyzed areas.

Characterization of microstructural and mechanical properties of high-pressure die-cast en ac 46000 alloy

By Aluminium-J, Technical Data-J, , , , , , , , ,

EN AC 46000合金の銅含有量が機械的特性に与える影響：高圧ダイカスト（HPDC）における性能最適化の鍵 この技術概要は、M. Tocci, S. Ferri, L. Montesano, A. Polaによって執

Read More

Fig. 1 e Schematic of the CPC machine and process procedure (a) Structure of the CPC machine (b) Major steps of the CPC process: (i) pressure chamber closed; (ii) furnace and pressure chamber are pressurized; (iii) furnace pressure is further increased slowly; (iv) chamber pressure is quickly released; (v) furnace pressure is released;(vi) chamber and die are opened; and (vii) the cast part is ejected.

A study of an industrial counter pressure casting process for automotive parts

By Aluminium-J, Technical Data-J, , , , , , , , , , ,

1. 概要: 2. 抄録: カウンタープレッシャー鋳造（Counter pressure casting, CPC）は、アルミニウム部品生産における優れた能力が報告されていることから、低圧ダイカスト（LPDC）の代替とし

Read More