Tag Archives: Review

FIG. 2 Door and window frames for a German sports car (Photo: Georg Fischer AG). Telai di portiere e finestrini di un’automobile sportiva tedesca (Photo: Georg Fischer AG).

構造部品の成功したダイカストへの工具鋼メーカーの貢献

本紹介論文は、「AIM / La Metallurgia Italiana」によって発行された論文「構造部品の成功したダイカストへの工具鋼メーカーの貢献 (The tool steel producer’s contri

Read More

Fig. 1. The components of intermetallic phases examined using XRD and TEM in the Mg4LaxAl (x ¼ 08, wt.%) alloys fabricated by gravity die casting. The purple dotted lines correspond to the critical Al/La ratio for the formation of certain simplex intermetallic phase, and the dotted gray area corresponds to the Al/La range where only Mg12La phase forms. (For interpretation of the references to color in this figure legend, the reader is referred to the Web version of this article.)

Developing a die casting magnesium alloy with excellent mechanical performance by controlling intermetallic phase

1. 概要: 2. 研究背景: 3. 研究目的と研究課題: 4. 研究方法 5. 主な研究成果: 6. 結論と考察: 7. 今後のフォローアップ研究: 8. 参考文献: 9. 著作権: この資料は上記の論文に基づいて要約

Read More

Figure 4. 3D scheme of the rolling process and 2D simplification in the FE simulation.

ハイブリッド部品のインターロックのための冷間圧延鋼板上のアンダーカット付き両面表面構造

本紹介論文は、「[Machines]」によって発行された論文「Double-Sided Surface Structures with Undercuts on Cold-Rolled Steel Sheets for

Read More