Tag Archives: Microstructure

Fig. 2. Microstructure of Al-Si-Mg-Mn and Al-Mg-Si-Mn alloys in the initial state and after chemical modification of eutectic (developed based on: www.alurheinfelden.com)

Al-Mg-Si-Mn合金の微細構造形成と結晶粒微細化

Al-Mg-Si-Mn合金の微細構造形成と結晶粒微細化 高延性Al-Mg-Si-Mn合金のブレークスルー:チタン添加がもたらす強度と延性の二重改善効果とは? 本技術概要は、Viktoriya Boyko氏らによる学術論文

Read More

Fig. 2. Structure of the sand cast alloy(top left) and anodic layer (top right) and structure of the high pressure cast (bottom left) and anodic layer (bottom right) produced on the composite EN-ACAlSi9Cu3

高圧ダイカスト vs. 砂型鋳造:アルマイト処理後のAlSi9Cu3合金の耐摩耗性と硬度を最大化する方法

高圧ダイカスト vs. 砂型鋳造:アルマイト処理後のAlSi9Cu3合金の耐摩耗性と硬度を最大化する方法 本技術概要は、[J. KONIECZNY, K.LABISZ, M. POLOK-RUBINIEC, A. WŁO

Read More

Fig. 7 — XRD graphical analysis of the die casting parts Run 5, (b) Run 9, (c) Run 18, (d) Run 20, (e) Run 11 and (f) Run 24

Effects of process parameters on mechanical and metallurgical properties in high pressure die casting of AZ91 magnesium alloy

AZ91マグネシウム合金の高圧ダイカストをマスターする:タグチメソッドによるプロセスパラメータの最適化 この技術概要は、Ali Serdar Vanli氏とAnil Akdogan氏によって執筆され、Indian Jou

Read More

Fig. 5. Simulation of filling a thin-wall casting mould when filled in: (a) 15%; (b) 30%; (c) 50%; (d) 70%; (e) 100%; and (f) in the course of casting solidification

The Effect of a Thin-Wall Casting Mould Cavity Filling Conditions on the Casting Surface Quality

薄肉鋳物の表面品質を脅かす「コールドショット」:鋳造シミュレーションが解き明かす根本原因と対策 本技術概要は、A. Trytek氏らによる学術論文「The Effect of a Thin-Wall Casting Mo

Read More

Fig. 2: Microstructures of Al-5.0Cu-0.6Mn-0.5Fe alloy under pressures of 0 MPa (a) and 75 MPa (b) [19]

Research progress on squeeze casting in China

論文タイトル:スクイズキャスティング技術の最前線:中国の研究が示す高性能部品製造の未来 この技術概要は、[Li Yuanyuan氏ほか]による学術論文「[Research progress on squeeze cast

Read More

Source: Daimler AG, Dr. Lutz Storsberg, Mercedes-Benz Cars, Structural Symposium Bühler AG, Hamilton, Canada, October 1, 2013

High Integrity Diecasting for Structural Applications

高潔性ダイカストの未来を拓く:構造部品の品質を最大化するホリスティックアプローチ この技術概要は、Martin Hartlieb氏が2013年にiMdc meeting (WPI, Worcester, MA)で発表した

Read More