Tag Archives: High pressure die casting

Fig. 1. Air Porosity in the section of an aluminium diecast part

ANALYZE OF THE POSSIBLE CAUSES OF POROSITY TYPE DEFFECTS IN ALUMINIUM HIGH PRESSURE DIECAST PARTS

アルミニウム高圧ダイカストの巣欠陥:原因分析と最先端の防止策を徹底解説 この技術概要は、Ferencz Peti氏およびLucian Grama氏によって執筆され、Scientific Bulletin of the „

Read More

Fig. 1. Photograph of the project under analysis. View: a) from the fixed half; b) from the mobile half

Effect of Cavitation Phenomenon on the Quality of High-Pressure Aluminium Alloy Castings

[WordPress Blog Post Template] 高圧ダイカストのキャビテーション:金型寿命を縮める根本原因とシミュレーションによる対策 本技術概要は、[Marcin Brzeziński]氏および[Jaku

Read More

Fig. 16. Thin wall heat dissipation shells (a, b, and c — front, back, and perspective view, respectively), which are produced by air cooled stirring rod (ACSR) process combined with high-pressure die casting machine [51]. Here, A, B, C, and D — regions from which the samples were prepared [51] to study their microstructure and mechanical properties

CASTING QUALITY ENHANCEMENT USING NEW BINDERS ON SAND CASTING AND HIGH-PRESSURE RHEO-DIE CASTING

レオHPDC革命:従来法を超える機械的特性と品質を実現する新技術 本技術概要は、P. PUSPITASARI氏およびJ.W. DIKA氏によって執筆され、Prog. Phys. Met.(2019年)に掲載された学術論文

Read More

Figure 1. Photographs of the die-casting die used for manufacturing mechanical parts after the diecasting operation, showing (a) the die cavity and heat-checking and (b) the core pin.

MATERIAL PROPERTIES OF DIE-CASTING DIE AROUND HEAT-CHECKING CREATED BY A HIGH-PRESSURE ALUMINUM ALLOY DIE-CASTING OPERATION

金型ヒートチェックの謎を解く:残留応力の逆転が金型寿命を縮めるメカニズム 本技術概要は、Okayasu Mitsuhiro氏およびShimazu Junya氏によって執筆され、International Journal

Read More

Fig.1. Cause and effect diagram (Ishikawa diagram) for casting porosity

Taguchi法を用いたADC12アルミニウム合金の高圧ダイカストプロセスにおけるプロセスパラメータの最適化

この紹介記事は、”[International Journal of Pure and Applied Mathematics]”によって発行された論文「”[Optimization of process paramet

Read More

Fig -2: Drafting of plate

Design and Manufacture a Pressure Die Casting Tool for the manufacturing of the Clutch hub

クラッチハブのダイカスト金型設計:生産性を最大化する設計計算とプロセス最適化 この技術概要は、Akshay K. Khandagale氏によって執筆され、Journal Publication of Internatio

Read More

Figure 1: Porosity lens defects along a shearing plane

LS-DYNA SPH法を用いた半溶融金属鋳造のモデル化への応用

Application of LS-DYNA SPH Formulation to Model Semi-Solid Metal Casting 本技術概要は、F. Pineau氏およびG. D’Amours氏が執筆し、

Read More

Fig. 4. The elongation of AZ91 alloy castings with the home scrap in the charge.

AZ91合金の高圧ダイカストにおける自家発生スクラップが設備寿命に与える影響

コスト削減の罠:AZ91合金の自家発生スクラップがダイカスト金型寿命を半減させる 本技術概要は、[Z. Konopka, M. Łągiewka, A. Zyska]によって執筆され、[ARCHIVES of FOUND

Read More