Tag Archives: High pressure die casting (HPDC)

Fig. 2. Microstructure of Al-Si-Mg-Mn and Al-Mg-Si-Mn alloys in the initial state and after chemical modification of eutectic (developed based on: www.alurheinfelden.com)

Al-Mg-Si-Mn合金の微細構造形成と結晶粒微細化

Al-Mg-Si-Mn合金の微細構造形成と結晶粒微細化 高延性Al-Mg-Si-Mn合金のブレークスルー:チタン添加がもたらす強度と延性の二重改善効果とは? 本技術概要は、Viktoriya Boyko氏らによる学術論文

Read More

Fig 7. HPDC Machine

Flow pattern analysis of melted aluminum in shot sleeve of pressure dies casting and minimizing the defect

ショットスリーブの欠陥を9割削減?HPDC流動解析が解き明かす最適プロセスの鍵 本技術概要は、Rupesh Kumar Tiwari氏およびTrilok Raj Chauhan氏によって執筆され、Internationa

Read More

Fig. 7 — XRD graphical analysis of the die casting parts Run 5, (b) Run 9, (c) Run 18, (d) Run 20, (e) Run 11 and (f) Run 24

Effects of process parameters on mechanical and metallurgical properties in high pressure die casting of AZ91 magnesium alloy

AZ91マグネシウム合金の高圧ダイカストをマスターする:タグチメソッドによるプロセスパラメータの最適化 この技術概要は、Ali Serdar Vanli氏とAnil Akdogan氏によって執筆され、Indian Jou

Read More

Fig. 1 Typical Sensor Recordings from a Casting Process

Reduction of rejects by combining data from the casting process and automatic X-ray inspection

AIを活用した鋳造プロセス最適化:プロセスデータとX線検査の連携による不良率削減の新手法 本技術概要は、[Thomas STOCKER氏ら]によって執筆され、[e-Journal of Nondestructive Te

Read More

Fig.9. Short shot experiments proved that it is vital to simulate shot sleeve process before cavity filling simulations.

気孔欠陥の削減:HPDCショットスリーブシミュレーション最適化ガイド

この技術要約は、Matti Sirviö、Sami Vapalahti、およびJukka Väinölä(VTT Industrial Systems)によって発表された学術論文「Complete Simulation

Read More

Source: Daimler AG, Dr. Lutz Storsberg, Mercedes-Benz Cars, Structural Symposium Bühler AG, Hamilton, Canada, October 1, 2013

High Integrity Diecasting for Structural Applications

高潔性ダイカストの未来を拓く:構造部品の品質を最大化するホリスティックアプローチ この技術概要は、Martin Hartlieb氏が2013年にiMdc meeting (WPI, Worcester, MA)で発表した

Read More

Fig. 6. Average weight of aluminum castings per vehicle.

Circumstances of the Automotive Industry Impact on Aluminum Foundries

ペーパータイトル:自動車産業の激変はアルミニウム鋳造業界に何をもたらすか?生き残りのための競争環境分析 この技術概要は、R. Gallo氏によって執筆され、AFS Proceedings 2010 American Fo

Read More

Figure 1: Test bars are put into an aluminum 226 melt for a total time of 32 hours to evaluate the thermo-chemical resistance.

INCREASING COMPETITIVENESS IN HIGH PRESSURE DIE CASTING WITH ADDITIVE MANUFACTURING

アディティブ・マニュファクチャリングが拓く高圧ダイカストの新時代:金型寿命と生産性を劇的に向上させる技術 本技術概要は、Armin WIEDENEGGER氏らによる学術論文「INCREASING COMPETITIVEN

Read More

Fig.1 – (a) The rotating furnace-sonication system; (b) Impeller with nitrogen degassing, (c) Shock tower

An investigation on effect of rotary degassing-ultrasonic method on high pressure die casting products

高圧ダイカストの品質を革新する:回転脱ガス超音波法が気孔率と介在物を劇的に削減するメカニズム この技術概要は、R. Haghayeghi氏によって執筆され、La Metallurgia Italiana(2022年)に掲

Read More

Figure 2 - Counter-pressure casting system [8].

Development of Heat Treatments for Components Produced by Low Pressure Die Casting in Aluminum Alloys

AlSi7Mg0.3合金の限界突破:低圧鋳造部品の熱処理最適化が機械的特性を最大化する秘訣 この技術概要は、Ricardo Mil-Homens Jorge氏による学術論文「Development of Heat Tre

Read More