Tag Archives: Die casting

Fig. 16. Thin wall heat dissipation shells (a, b, and c — front, back, and perspective view, respectively), which are produced by air cooled stirring rod (ACSR) process combined with high-pressure die casting machine [51]. Here, A, B, C, and D — regions from which the samples were prepared [51] to study their microstructure and mechanical properties

CASTING QUALITY ENHANCEMENT USING NEW BINDERS ON SAND CASTING AND HIGH-PRESSURE RHEO-DIE CASTING

レオHPDC革命:従来法を超える機械的特性と品質を実現する新技術 本技術概要は、P. PUSPITASARI氏およびJ.W. DIKA氏によって執筆され、Prog. Phys. Met.(2019年)に掲載された学術論文

Read More

Figure 1. Photographs of the die-casting die used for manufacturing mechanical parts after the diecasting operation, showing (a) the die cavity and heat-checking and (b) the core pin.

MATERIAL PROPERTIES OF DIE-CASTING DIE AROUND HEAT-CHECKING CREATED BY A HIGH-PRESSURE ALUMINUM ALLOY DIE-CASTING OPERATION

金型ヒートチェックの謎を解く:残留応力の逆転が金型寿命を縮めるメカニズム 本技術概要は、Okayasu Mitsuhiro氏およびShimazu Junya氏によって執筆され、International Journal

Read More

Fig.1. Cause and effect diagram (Ishikawa diagram) for casting porosity

Taguchi法を用いたADC12アルミニウム合金の高圧ダイカストプロセスにおけるプロセスパラメータの最適化

この紹介記事は、”[International Journal of Pure and Applied Mathematics]”によって発行された論文「”[Optimization of process paramet

Read More

Fig. 41. Tsol - Solidus Temperature (°C) vs. Cu (wt.%) and SiEQ (wt.%)

AlSiCu合金の凝固解析を革新する:動的ベースラインアプローチによる鋳造シミュレーションの精度向上

Fraction solid evolution characteristics of AlSiCu alloys – dynamic baseline approach この技術概要は、P. Marchwica, J.

Read More

Fig. 3. Frequency Histogram Plots of Bending Strength for Horizontal and Vertical Sampling Method

Al-12Si合金鋳物の機械的強度に及ぼすボルテックスランナー湯口システムの影響

ボルテックスランナー湯口システムの最適化:Al-12Si合金鋳物の機械的強度を最大化する鍵 本技術概要は、[R. AHMAD, M.Y. HASHIM]氏によって執筆され、[ARCHIVES OF METALLURGY

Read More

Fig -2: Drafting of plate

Design and Manufacture a Pressure Die Casting Tool for the manufacturing of the Clutch hub

クラッチハブのダイカスト金型設計:生産性を最大化する設計計算とプロセス最適化 この技術概要は、Akshay K. Khandagale氏によって執筆され、Journal Publication of Internatio

Read More

Figure 1: Porosity lens defects along a shearing plane

LS-DYNA SPH法を用いた半溶融金属鋳造のモデル化への応用

Application of LS-DYNA SPH Formulation to Model Semi-Solid Metal Casting 本技術概要は、F. Pineau氏およびG. D’Amours氏が執筆し、

Read More