Tag Archives: CFD

Table 1- Coefficients of quadratic (i.e., +,- ) and linear (i.e., ./ - ) effects as well as the p-value of the quadratic effects of explanatory variables with negative +,- values in the logistic, probit, and cloglog models, where the best choice (i.e., maximizer) is calculated given by −./ -/0+,-.

AI駆動によるダイカストのスマート製造を目指して

AIはダイカストの不良率をいかに削減するか?統計分析と機械学習による品質向上のアプローチ この技術概要は、F. Liu氏らによって執筆され、NADCA Transactions 2018で発表された学術論文「TOWARD

Read More

FIGURE 2. Competitive Assessment of Customer Requirements.

ダイカスト製造会社におけるリーン生産方式の適用に関するケーススタディ

生産性向上の鍵は現場にあり:リーン生産方式によるダイカスト工程の課題解決アプローチ この技術概要は、Ng Tan Ching氏らによる学術論文「Case study of lean manufacturing appli

Read More

Figure 6. (a) Hydroformed aluminum rail for Corvette Z06 shown immediately after forming (Luo & Sachdev, 2008). (b) AZ31 magnesium tube gas-formed at 350°C showing 80% circumference expansion (Luo & Sachdev, 2008)

自動車用途向け軽金属および製造における最近の進歩

CALPHADとICMEが拓く、次世代自動車向け軽金属材料と製造技術の最前線 この技術概要は、A. A. Luo氏によって執筆され、CIM Journal (2021年)に掲載された学術論文「Recent advance

Read More

Figure 3. Example of recycling of Mg-Zr-Nd aeronautical components (alloys type: RZ5).

犠牲陽極を得るためのマグネシウム合金航空宇宙部品のリサイクル

航空宇宙スクラップを高性能な犠牲陽極へ転換:最大75%のコスト削減を実現するリサイクル技術 この技術概要は、A. Buzaianu氏らによって発表された学術論文「Recycling of magnesium alloys

Read More

Research on Properties and Applications of New Lightweight Aluminum Alloy Materials

新規軽量アルミニウム合金材料の特性と応用に関する研究

自動車産業の未来を拓く:軽量アルミニウム合金の特性、応用、および将来展望の徹底解説 このテクニカルブリーフは、Yucheng Yong氏によって執筆され、Highlights in Science, Engineerin

Read More

Fig. 3.1 Shrinkage prediction by Modulus Method 5)

Al-Si合金金型鋳造品のポロシティ欠陥に関する研究

鋳造シミュレーションとニヤマクライテリオン活用によるアルミニウム合金のポロシティ欠陥低減への実践的アプローチ この技術概要は、MINAMI Rin氏による学術論文「Research on Porosity Defects

Read More

Fig.6 Microstructure of material 1.6356-UTPA 702; a) 2nd layer of clad; b) 1st layer of clad; c) HAZ

Renovation of moulds for high-pressure casting of aluminium by laser cladding

レーザークラッディング技術による高圧ダイカスト金型の寿命延長と性能向上 このテクニカルブリーフは、Janette Brezinová氏とMiroslav Džupon氏によって執筆され、「INTERNATIONAL SC

Read More