Tag Archives: Casting Technique

Fig. 2: Microstructures of Al-5.0Cu-0.6Mn-0.5Fe alloy under pressures of 0 MPa (a) and 75 MPa (b) [19]

Research progress on squeeze casting in China

論文タイトル:スクイズキャスティング技術の最前線:中国の研究が示す高性能部品製造の未来 この技術概要は、[Li Yuanyuan氏ほか]による学術論文「[Research progress on squeeze cast

Read More

Fig. 1 Hybrid gussets Al-Steel for a full electric urban utility vehicle (red parts: steel inserts, white parts: Al-casting nodes).

Evaluation of Coating Systems for Steel Aluminum Hybrid Casting

鋼-アルミニウムハイブリッド鋳造の未来:PVD Al-Siコーティングが実現する延性接合のブレークスルー この技術概要は、Xiangfan Fang氏によって執筆され、Journal of Materials Scien

Read More

Fig. 1. Aluminium Die Cast Parts.

自動車部品の軽量化と高強度化を実現する鋳造法レビュー:ダイカストの優位性とは?

はい、承知いたしました。ご指示に従い、指定された論文を分析し、ダイカスト製品メーカー「CASTMAN」の企業ブログ向けに、SEOを意識した技術解説記事を作成します。論文の情報のみを使用し、推測や創作は一切行いません。以下

Read More

Fig. 4 - Porosity identify by a) X-ray on components from the first experimental activity, b) FEM simulations, c) X-ray on components from the final experimental activity (optimization of process parameters)

高圧ダイカストにおける新しいレオキャスティングアプローチ:HPDCエンジニアとR&Dマネージャーのための品質向上とコスト削減

この技術概要は、[Giovanni Cecchel, Antonio Fabrizi, Paolo F. Bariani]による学術論文「[High Pressure Die Casting of Rheocast Al

Read More

Fig. 1 e Schematic of the CPC machine and process procedure (a) Structure of the CPC machine (b) Major steps of the CPC process: (i) pressure chamber closed; (ii) furnace and pressure chamber are pressurized; (iii) furnace pressure is further increased slowly; (iv) chamber pressure is quickly released; (v) furnace pressure is released;(vi) chamber and die are opened; and (vii) the cast part is ejected.

A study of an industrial counter pressure casting process for automotive parts

1. 概要: 2. 抄録: カウンタープレッシャー鋳造(Counter pressure casting, CPC)は、アルミニウム部品生産における優れた能力が報告されていることから、低圧ダイカスト(LPDC)の代替とし

Read More

etup casting Die Pressure High 1: F

Al6061-Al₂O₃金属マトリックス複合材料のダイカスト法による機械的特性

Al6061合金の性能向上:アルミナ粒子添加が引張強度と耐摩耗性を最大化する最適条件とは この技術概要は、Mahendra HM氏らによって執筆され、Journal of Material Science and Met

Read More

Figure 1: Injection molding machine set up

高密度ポリエチレン(HDPE)材料のひけを低減するための射出成形プロセスパラメータの最適化に関するレビュー

タグチメソッドを活用してHDPE部品のひけを最小化する:コストと時間を削減するプロセス最適化のアプローチ この技術概要は、Harshal P. Kale氏およびDr. Umesh V. Hambire氏によって執筆され、

Read More

Figure 0.2: (a) The geometrical dimensions and (b) the thickness distribution (mm) of the 2020 Ford explorer aluminium shock tower.

薄肉構造アルミニウム車体鋳物の大量生産のための費用対効果の高いプロセスルート

この記事では、[RWTHアーヘン大学]が発行した論文「A cost-efficient process route for the mass production of thin-walled structural al

Read More