Tag Archives: Aluminum Casting

Fig. 3. Frequency Histogram Plots of Bending Strength for Horizontal and Vertical Sampling Method

Al-12Si合金鋳物の機械的強度に及ぼすボルテックスランナー湯口システムの影響

ボルテックスランナー湯口システムの最適化:Al-12Si合金鋳物の機械的強度を最大化する鍵 本技術概要は、[R. AHMAD, M.Y. HASHIM]氏によって執筆され、[ARCHIVES OF METALLURGY

Read More

Fig -2: Drafting of plate

Design and Manufacture a Pressure Die Casting Tool for the manufacturing of the Clutch hub

クラッチハブのダイカスト金型設計:生産性を最大化する設計計算とプロセス最適化 この技術概要は、Akshay K. Khandagale氏によって執筆され、Journal Publication of Internatio

Read More

Figure 1: Porosity lens defects along a shearing plane

LS-DYNA SPH法を用いた半溶融金属鋳造のモデル化への応用

Application of LS-DYNA SPH Formulation to Model Semi-Solid Metal Casting 本技術概要は、F. Pineau氏およびG. D’Amours氏が執筆し、

Read More

Figure 2.1: LM 25 (Al—7Si-0.3Mg) aerospace and automotive thin walled products (efunda, 2009).

THE EFFECTS OF VORTEX GATE DESIGN ON MECHANICAL STRENGTH OF THIN SECTION CASTING OF LM 25 (Al—7Si-0.3Mg) ALUMINUM CASTING ALLOY

渦流ゲート設計が拓く未来:LM25アルミ薄肉鋳造の機械的強度を最大化する新アプローチ この技術概要は、ZAID ALI SUBHI氏による論文「THE EFFECTS OF VORTEX GATE DESIGN ON M

Read More

Fig. 1. Parts of housing used for anodizing in the state before anodizing: a) AlSi12, b) AlSi8 and after anodizing: c) AlSi12, d) AlSi8

一次シリコン析出物が陽極酸化アルミニウム合金の表面層特性に与える影響

高圧ダイカスト(HPDC)部品の品質向上へ:Al-Si合金の陽極酸化処理を最適化する新知見 本技術概要は、Krzysztof LABISZ氏らによる学術論文「Influence of Primary Silicon Pr

Read More

Fig. 1. Simulation model of alloy crystallization in the temperature range 700-500 ° C, determined for alloys 1.1-1.3.

Al-Cu-Si合金の機械的特性と被削性の最適化:HPDC部品の性能を向上させる新研究

Analysis of the Microstructure, Properties and Machinability of Al-Cu-Si Alloys この技術概要は、J. Kozana氏らによって執筆され、AR

Read More

Fig. 1 Principles of oxide formation on the surfaces of liquid aluminum alloys exposed to oxygen containing gases [1], (b) and (c) oxide formation during uncontrolled filling of the mould [1], (d) and (e) occlusion of oxide and air during uncontrolled filling of the mould [1].

Contribution to Solving an Inherent Problem When High Pressure Die-Casting Aluminium and its Alloys

高圧ダイカストの隠れた欠陥:酸化膜問題を根本から解決するショットスリーブ下方充填の新コンセプト この技術概要は、Herbert Smetan氏によって執筆され、Journal of Materials Science a

Read More