Tag Archives: 금형

Figure 1 The aluminium life cycle

消費者使用済みアルミニウムスクラップの化学組成 – アルミニウムリサイクルの課題

アルミニウムリサイクルの隠れた課題:消費者使用済みスクラップの化学組成を管理し、高品質なダイカスト製品を実現する方法 この技術概要は、Ciprian Bulei、Imre Kiss、Mihai–Paul Todorによる

Read More

Fig. 3.11: Equivalent alternating stress for aluminium alloy

Effect of Die Geometry on Fatigue Analysis of Aluminium Alloy (ADC12 Aluminium A383) using Pressure Die Casting Process

論文タイトル 金型寿命を最大化する冷却チャネル設計:ADC12アルミ合金の熱疲労解析から学ぶ新知見 この技術概要は、Poshan Dewangan氏らによる学術論文「Effect of Die Geometry

Read More

Figure.1. Optical micrographs of the as cast samples (a) Die casting specimen, (b) Squeeze Casting at pressure of 50MPa, (c) Squeeze Casting at pressure of 75MPa, (d) Squeeze Casting at pressure of 100MPa

A Comparative Work on Die Casting and Squeeze Casting Techniques of A319 Cast Aluminium Alloy

論文タイトル:スクイズキャストが切り拓くA319アルミニウム合金の新たな可能性:重力鋳造を超える機械的特性の実現 この技術概要は、[11th International Conference on Science Eng

Read More

Fig. 9. Freezing time [s] of materials CP-Al, 2124, 2218, and 6063 prepared at 0, 25, 75, 100, 125 and 150 MPa

EFFECT OF LIQUID FORGING PRESSURE ON SOLUBILITY AND FREEZING COEFFICIENTS OF CAST ALUMINUM 2124, 2218 AND 6063 ALLOYS

液圧鍛造圧力の最適化:アルミニウム合金の気孔率を低減し、硬度を最大化する新知見 本技術概要は、VINEET TIRTH氏およびAMIR ARABI氏によって執筆され、Arch. Metall. Mater. (2020)

Read More

Fig. 1. Air Porosity in the section of an aluminium diecast part

ANALYZE OF THE POSSIBLE CAUSES OF POROSITY TYPE DEFFECTS IN ALUMINIUM HIGH PRESSURE DIECAST PARTS

アルミニウム高圧ダイカストの巣欠陥:原因分析と最先端の防止策を徹底解説 この技術概要は、Ferencz Peti氏およびLucian Grama氏によって執筆され、Scientific Bulletin of the „

Read More

Fig. 1. Photograph of the project under analysis. View: a) from the fixed half; b) from the mobile half

Effect of Cavitation Phenomenon on the Quality of High-Pressure Aluminium Alloy Castings

[WordPress Blog Post Template] 高圧ダイカストのキャビテーション:金型寿命を縮める根本原因とシミュレーションによる対策 本技術概要は、[Marcin Brzeziński]氏および[Jaku

Read More

Fig. 16. Thin wall heat dissipation shells (a, b, and c — front, back, and perspective view, respectively), which are produced by air cooled stirring rod (ACSR) process combined with high-pressure die casting machine [51]. Here, A, B, C, and D — regions from which the samples were prepared [51] to study their microstructure and mechanical properties

CASTING QUALITY ENHANCEMENT USING NEW BINDERS ON SAND CASTING AND HIGH-PRESSURE RHEO-DIE CASTING

レオHPDC革命:従来法を超える機械的特性と品質を実現する新技術 本技術概要は、P. PUSPITASARI氏およびJ.W. DIKA氏によって執筆され、Prog. Phys. Met.(2019年)に掲載された学術論文

Read More